Sap Collection

A small nylon brush designed for cleaning spouts. From end to end this brush is 6" long.

A 9" round bucket brush for bucket washers that require just one brush.

Line Viper Tool Cutter for 5/16" and 3/16" Tools. Bolts on to any Line Viper tool with a redesigned fork and frame. That redesign took place around...

1 1/2"x5" Stainless Threaded Nipple

Leader Spout Hammer with Wooden Handle.

Drill only for 15/32" Hole Cutter.

15/32" Hole Cutter Drill

H2O 36" Precut Dropline, Blue. These come nice and straight. However, if we ship them they may get bent to fit in the box and have a small curve to...

14 Gauge Galvanized Mainline Side Pull Wire 10 lbs. (approx. 580 ft.)

New, 200 Gallon plastic pickup tank. This tank had a hole, but has been patched (see picture). Opposite end from the drain. This tank is 52" diame...

Tubing Adapter Separator. For separating stubby spouts from adapters. It also has a spot that works as a hammer, and the piece on the top is for re...

5/16" H2O Tee with Cup Plug.

Tubing De-nuder Pliers with Cutter and Spout Remover/Hammer for 5/16" Tubing (4 function)

804 Gallon H2O Stainless Tank, no skids (62"x96"x44.5") with a 2" Drain.

Blue Plastic Vent Cap for 8" Tank Cover.

Lapierre End Line Hooks (red) for 5/16" Tubing.

Mainline and Wire Reel Cart. This cart will work with any size mainline. Can be towed behind an ATV. It has an adjustable brake to keep it from ove...

3/4" - 1 1/2" Mainline Tool. This tool will work on mainline from as small as 3/4" up to 1 1/2". It has adapters to switch out for different sizes.

YOUR Dewalt Drill MUST HAVE a provision to mount a secondary handle or it will NOT WORK with this tool!!! Drill Sold Separate. Designed to perfect ...

1 1/4" Stainless Insert Tee.

1 1/2" Stainless Insert Tee.

Compact 1 Hand Tubing Tool for 5/16" Tubing.

Manual Cut Vacuum Pliers. Used to cut off the vacuum on a tubing line while making a repair.

Loac Two Hand 5/16" Tubing Tool with Cutter.

An adapter for checking vacuum on the end of your 5/16" lines. It has a 5/16" barbed fitting to go into the pipe and then 1/4" female pipe threads ...

Lapierre 5/16" End Line Tee (left side plugged)

Middle Valley Clear 5/16" Arc Barbed Spout. The Barbed end goes into the tree for a better seal without blocking off so much wood in the tap hole. ...

Middle Valley 5/16" Black Tee w/Arc. The pin on the bottom can be used to plug off tubing if you are using a seasonal spout, or a stubby spout. The...

H2O 5/16" Tee w/Plug.

1.5" x3/4" Stainless Threaded Reducing Bushing

Wire Lag Hook for attaching one end of your wire for the mainline.

Lapierre Clear Spout Reducer (7/16" to 1/4"). These adapters take a 1/4" hole and will work with the Lapierre or Leader stubby spouts.

355 Gallon H2O Stainless Tank, Economical Model (4'x4'x4'). There is a 2" fitting with female threads on the bottom. This tank has an elevated fram...

233 Gallon H2O Tank (4'x4'x36") non elevated frame. There is a 2" fitting with female threads on the bottom for a drain.