Evaporator Accessories

This cup is used with a short syrup hydrometer. All you need to do is fill the cup with syrup, float the hydrometer in the cup and if the dial on t...

2" in diameter; 8" tall

1" Diameter, 8" tall

12" tall; 2" diameter

Baume & Brix scale 25°-40° Baume, 45°-75° Brix. Red lines at hot and cold test. 9 3/8" long State of Vermont inspected

Brix scale 50°-71°. Red lines at hot and cold test. State of Vermont inspected

Brix scale. 1°-12°Brix calibrated at 38°F

Brix scale, 1°-12° Brix calibrated at 38° F. Divided into 1/10° Brix increments. State inspected

Works with a Long Style Hydrometer Cup. Will not work in a short cup. Brix scale 0°-35° for checking high concentrate

Ayres HydrothermA hydrotherm combines a hydrometer and a thermometer into oneunit. Just float the hydrotherm in syrup and when the red/blue line is...

45°-82° Brix

0°-18° Brix

Refractometer Calibration Solution

These firing gloves are great for loading wood into the arch. 12" from the tip of the finger to the end of the cuff. This thick gloves will help pr...

Rubber Gloves for Hot Syrup or Water, 14" from finger tip to end of the cuff. These gloves work great for cleaning a filter press or for cleaning e...

Hanna Digital Thermometer, 5" stem

Hanna Digital Thermometer, 12" stem

Smoke Stack Thermometer

3" Dial 0 - 50 Degrees 6" Stem Thermometer

3" Dial Thermometer, 0-50 with 6" Stem and Swivel Head

3" Dial 0 - 50 Degrees 9" Stem Thermometer

3" Dial, 0-50 Degrees, 12" Stem Thermometer

3" Dial 20 - 240 Degrees 6" Stem Thermometer

3" Dial 20 - 240 Degrees 9" Stem Thermometer

5" Dial 0 - 50 Degrees 6" Stem Thermometer

5" Dial 0 - 50 Degrees 9" Stem Thermometer

5" Dial 20 - 240 Degrees 6" Stem Thermometer

5" Dial 20 - 240 Degrees 9" Stem Thermometer

Thermometer Bracket for Welded Pan (for digital or dial therm.)

This sight gauge is for the flue pan, and comes with a 1/2" brass gate valve, 12" glass tube, and a stainless bracket to hold the top of the tube. ...

This sight gauge is for the flue pan, and comes with a 1/2" brass gate valve, 18" glass tube, and a stainless bracket to hold the top of the tube. ...

A sight tube assembly that should fit almost any place you would like to put a sight tube. It has all stainless parts no brass, and the glass tube ...

A replacement 1/2" diameter glass tube that is 12" long for a standard sight gauge.

This replacement glass tube is for Leader's Max flue pans. It has a 1/2" diameter and is 18" long.

A replacement brass valve for a sight gauge. This is just the valve that comes with the rubber gasket inside. The valve has 1/2" male threads on it...

Sap Level Gauge Gasket.

Brass Washer for Sap Level Valve.

A digital meter that tells you the barometric pressure in inches of mercury and the boiling point of water in degrees of Fahrenheit based on the ba...

H2O 2" Modulating Automatic Draw-off with Barometric Compensation, Motorized Valve, Controller and Probe. Comes with the down spout. Has a 2" tri-c...

Most producers that have tried an automatic drawoff could not imagine boiling without one again. This is a full feature Max Marcland automatic draw...

This bracket is made to hang on the side of a Leader welded flue pan and then you can mount your Marcland control box right on it. The bracket fits...

V11 - 1" Motorized Stainless Ball Valve only. This is a spare valve for use with a Marcland Max or Mini Automatic drawoff.

This is a spare/replacement temperature probe for an automatic drawoff. A spare probe can make changing drawoff sides much easier. Just change the ...

Temp. Probe Clip for Marcland Auto Drawoff temperature probe. This clip gets attached to the pan with a bolt (not included) and then the temperatur...

A rubber plunger for the inside of the Solenoid valves. This little rubber piece is what forms the seal inside the solenoid valve.

Small Stainless Skimmer

The large skimmer is roughly 5.5" wide, and used for skimming things out of the evaporator. Many producers purchase a hardwood handle to put on the...

The difference between a large scoop and a small scoop is just the width of the scoop. A large scoop is about 5.5" wide, but this small scoop is on...