Filtering & Canning

3/4" Plastic Faucet for 5 Gallon Plastic & Rieke Top Can

A replacement cap for the vent on the current blue plastic 5 gallon containers. Measures about 1" in diameter.

Rubber Gasket/Seal for Blue Plastic 5 Gal Container

A wrench designed for the covers on the blue plastic 5 gallon containers. This wrench works much better than a pair of channel locks. A nice tool t...

A 15 gallon stainless drum that is similar to a keg. These drums have a 2" opening in the center of the top of the drum, and no other fitting on th...

A steel barrel with an epoxy coating on the inside. This drum weighs 30 lbs. These drums have a two to three year life span and then the epoxy coat...

A 40 Gallon stainless Barinox drum. This drum has just one 2" bung on the top, no other fittings. The tare weight is 48 pounds. They stand 30" tall...

A steel barrel with an epoxy coating on the inside. These drums have a two to three year life span and then the epoxy coating starts to flake off.

A 4-wheeled drum cart for moving syrup drums around. This cart makes moving drums so much easier than trying to roll them around by hand. It has a ...

This drum bung wrench works great on the stainless drums and the epoxy lined drums. It does not work so well with the plastic drums. If you are put...

This is a 2" tri-sure bung. This is the same type of bung that is used in the stainless Barinox drums that we sell.

A thin/wide black rubber gasket for a tri-sure bung. Many of these bungs came with a hard plastic gasket, but we are unable to get those, and these...

A thick gasket for for a Rieke bung. Sometimes these gaskets are plastic sometimes they are more of a rubber material.

A 3/4" bung for stainless drums. This bung would be a replacement for the smaller bung that can be used as a vent on some drums.

A replacement gasket for a 3/4" bung. These black rubber gaskets will fit almost any 3/4" bung.

A drum over-flow control valve for those producers that fill drums. The unit fits down into the drum and has an overflow hose with a hook on the en...

1/4" Clear Hose

1/2" Clear Hose

5/8" Clear Hose

3/4" Clear Hose

7/8" Clear Hose

1" Clear Hose

A replacement diaphragm for a filter press with a hand pump. These only need to be replaced when one gets a hole in it.

A replacement ring for a filter press with a hand pump. This is the ring that holds the diaphragm in place and the handle attaches too. This ring i...

Plastic Ring for 7" Hand Pump on Filter Press

This replacement piece goes on the outside of the diaphragm and attaches to the handle. There is a separate piece inside the diaphragm that is sold...

A round plastic disc that goes under the diaphragm on a hand filter press. This button attaches to the clevis with the diaphragm in between.

Plastic Hand Pump Bottom Base

5 Gallon CDL Round Filter Tank w/Cover and Valve (9" x 22"). Designed for a Cone filter you can put inside it, and fold the filter over the top, th...

10" H2O 3 Frame Filter Press with an Electric Diaphragm Pump.