All Products [hidden]

Rheostat #KBWC-110K for an Evaporator Blower (new).

30"x18" SB Soldered Finishing Pan with Cover.

Lapierre Horizontal Belly Releaser for up to 6,000 taps. 

Used Double Diaphragm Electric Sap Guzzler Vacuum Pump (120v). Looks like it has been through a fire, but is still operational. 

4'x2' Welded Cross Flow Syrup Pan. This is a Leader copy made by Lapierre. The pan does have some burn spots on it. 

Used 1" Tanaka Gas Powered Sap Transfer Pump.

Used CDL 18"x36" Vertical Electric Releaser with 1.5 HP Submersible Pump. Rated for up to 6500 taps. 240V single phase. 

Busch 1202 Vacuum Pump, 142 CFM, 3 phase Motor, 4.8 KW, 6.4 HP (only pulls 22" of vacuum). Sold As Is

D&G RO Machine600 GPH w/New Membrane. This machine was just gone through by D&G and is ready for some sap. 

21"x21"x18" Stainless Welded Pan with Stainless Cover and Handles. This is pan was made with a thicker stainless. It has a 1/2" draw-off fitting an...

22" Diameter Round Open Topped Draw-off Tank w/Valve and Wooden Stand. Stands 21" tall. 

Grimm Stainless Soldered Trough for Candy Machine. This is an old soldered trough. No markings or tags on it. 

Used 10" Wes Fab Short Stack Aluminum Filter Press with Gear Pump.

18" Stack Cover w/3' of 18" Galvanized Smoke Stack.

40"x20" Welded Cross Flow Syrup Pan, Excellent. 2" tri-clamp pan connections, and 1.5" tri-clamp drawoff fittings. 

New Airablo Horizontal Electric Releaser with 2-0.5hp 12 gpm 75psi internal pumps. Good for up to 4-5,000 taps.

Leybold Vacuum Pump, Oil Cooled, 110 Volts (for up to 600 taps)

3'x20" Leader Welded Cross Flow Syrup Pan (New)

2'x5' Leader Welded Finishing Pan (New, factory second).

2'x2' Leader revolution Syrup Pan, Right Draw w/Closed Box (New Factory Second).

Bernard Vertical Double Vacuum Releaser. Good for up to 2,500 taps. 

Used 1 1/2 HP Airablo Oil Cooled Vacuum Pump with Oil Reclaimer.

Airablo 1 1/2 HP Vacuum Pump w/Radiator Oil Cooler.

D&G 600 GPH RO Machine with a New 8" Membrane. This machine has a 1hp feed pump and a 5hp high pressure pump.

Fork Truck Attachment for Picking up Drums (missing one arm) SOLD AS IS. Can be used as is to move 1 drum at a time.

Marcland Tank/High Level Alarm.  Just hook up a Romex or thermostat wire and put the other end of the wire in a tank. When the liquid level hits th...

Homemade Stainless Vacuum Booster Tank. This tank does have some fittings that have been broken off in it when they were removed.

Small Homemade Stainless Round Draw-off Tank w/Valve (10 1/2" diameter x 20" high).

Used 1/3 HP Electric Motor for Filter Press.

525 Gallon Horizontal Plastic Tank with a 2" Drain. This tank has a 16" cover. The tank measures 49" wide x 74" long x 54" high.  This tank will co...

3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...

Used Leader 1/2 Pint Welded Syrup Pan w/Valve

Used 7" Wes Fab Full Stack Aluminum Filter Press with Gear Pump.

A 10' wide blower unit designed to go over an over-head door and provide a curtain of air to keep pests out of the room or building.

Used Electric Single Diaphragm Vacuum Pump with 1.25" inlet and outlet. No releaser needed.

14" Stainless Roof Jack, Leader Style, 10/12 Pitch, Side mount.