All Products [hidden]

1" Stainless Drawoff Elbow (1" x 1")

Faucet Adapter for JET Bottle Washer

A rubber candy mold of snowmen. Each mold has 16 cavities and each cavity is of a snowman with a pipe and holding a broom. They measure 1 1/8" wide...

A digital meter that tells you the barometric pressure in inches of mercury and the boiling point of water in degrees of Fahrenheit based on the ba...

CDL Max Flow Tee w/Plug (for 7/16" spouts)

Used Cast Soule or Warner Spout.

This rubber candy mold has 16 cavities. It comes with variety of shapes including a Christmas bell, star, Christmas tree, holly, Santa's head, and ...

This tool pinches and stretches the tubing around the barb of the fitting so that the tubing can be removed without damaging the fittings. This too...

A 1/4" drill bit for tapping. These bits come down from Canada and have been designed to drill into frozen wood.

A piece of insulating blanket for use between the pans on 4' wide and larger archs. This blanket will come 6"x72" and is 1" thick. it can be cut wi...

A decorative bottle in the shape of a gingerbread man. This gingerbread man is 3" wide and stands 5.5" tall. He holds 100 ml or 3.4 ounces. A fun l...

8" Heavy Duty 15 Gauge Galvanized Wire Ties (500/Roll)

This is a grey Sugarhill plastic jug, printed for Maine, with a sugar house, moose and lighthouse scene wrapped around it.  There is a description ...

1" Short Plastic Nipple

3/4" Mainline Tee (Bottom w/ 1/2" Threaded Hole to Fit Threaded Manifold Top)

This is an almond Sugarhill plastic jug, printed for Massachusetts. There is a table display and window scene, through which is visible a sugar hou...

New Hampshire Maple baseball hat available in green or blue.

Every year George and the Man with the Yellow Hat attend the pancake breakfast to benefit the children’s hospital. Always curious, George finds his...

An automatic defoamer dripper for liquid defoamer. Just fill with defoamer and mount in a hood, or over the pan and it can be adjusted to drip the ...

An adapter for checking vacuum on the end of your 5/16" lines. It has a 5/16" barbed fitting to go into the pipe and then 1/4" female pipe threads ...

A decorative bottle in the shape of a gingerbread man. This gingerbread man is 2.5" wide and stands 4.5" tall. He holds 50 ml or 1.7 ounces. A fun ...

1" Mainline End Elbow (Bottom Piece w/1/2" Threaded Hole to Fit Threaded Manifold Top

1/2" Stainless Tee w/Female Thread

A 1.5" Tri-clamp solid end cap. Great for plugging holes when you take a pan off to clean it. Clamp and gasket sold separate.

This pail of cement is premixed and ready to use. On average customers can cement between 100-110 bricks out of a single 50lb pail.

1 1/2"x1" Stainless Reducing Bushing

A rubber candy mold in the shape of a large heart. This candy mold has 15 cavities and measures 2 1/4" wide and 2 1/4" tall. Great for Valentines D...

Spout Plug Soft

M-122 Male Adapter 3/4"

This is an easy to read maple syrup label sticker. It has an image of three differently colored maple leaves on a blue background which is inside a...

A 15 gallon stainless drum that is similar to a keg. These drums have a 2" opening in the center of the top of the drum, and no other fitting on th...

A 40 Gallon stainless Barinox drum. This drum has just one 2" bung on the top, no other fittings. The tare weight is 48 pounds. They stand 30" tall...

3/4" Stainless Mainline Insert Tee

This is a grey Sugarhill plastic jug, printed for New Hampshire, with a sap collecting scene and sugar house wrapped around it. A drawing of the Ol...

Smoke Stack Thermometer

1/2" x 3/4" Reducing Insert Coupling

This is an almond D&G plastic jug. The front has a oval sugar house scene, bordered with "Pure maple syrup" and the jug capacity information on...

This is the rubber regulator packing used in a Z arm for a Grimm evaporator or the older Leader Patriot evaporators. This packing was used for the ...

Fire Brick Standard 2 3/8" Thick x 4 1/8" Wide x 8 3/4" Long. This firebrick is rated for up to 3000 degrees Farenheight.

Mainline Side Tie Wire Spooler (600' per spool)

This notebook, written by Bradley Gillilan, is filled with information about running an evaporator. Whether you are just beginning, or have been bo...

This sight gauge is for the flue pan, and comes with a 1/2" brass gate valve, 12" glass tube, and a stainless bracket to hold the top of the tube. ...

Each mold has 10 cavities of Santa Claus. This is the whole Santa not just a head. Each Santa measures 1 7/8" wide and is 3" tall. Each cavity hold...

1" Stainless Mainline Insert Tee

A Christmas star, or a star for any other time of year. With this mold you can make up to 20 stars at a time. A nice bite-size piece of candy. Each...

A seal for the metal epoxy lined 5 gallon cans. New cans come with a seal, but if you want to reuse the can you may want a new seal.

A steel can with an epoxy coating on the inside. These cans have a two to three year life span and then the epoxy coating starts to flake off. Come...

Designed for Sugarhill and Bacon jugs. Other syrup jug manufacturers may not fit these boxes.