All Products [hidden]

A 3/4" bung for stainless drums. This bung would be a replacement for the smaller bung that can be used as a vent on some drums.

A thin/wide black rubber gasket for a tri-sure bung. Many of these bungs came with a hard plastic gasket, but we are unable to get those, and these...

A steel can with an epoxy coating on the inside. These cans have a two to three year life span and then the epoxy coating starts to flake off. Come...

Extra Tubing Tool Knife Blade.

Bascom Maple Farms baseball hat in blue with tan mesh and our logo on the front.

2" x 1" Plastic Reducing Bushing

1" Mainline Tee (Bottom Piece w/1/2" Threaded Hole to Fit Threaded Mainifold Top)

1" Leader Mainline Y

3/4" Mainline Insert Elbow

1" Mainline Insert Elbow

M-121 Female Camlock 3/4".

A 19/64" tapping bit that is a little longer than the other ones we sell. These bits are designed for a precision tapper, but also work in a standa...

Vermont Maple baseball hat, available in green or blue.

1/2" Chrome Bottling Faucet

3/4" Stainless Union

A rubber washer that is used in the pan connections between the flue pan and the syrup pan on a Grimm raised flue evaporator or a Leader Patriot.

Formerly know as Grade B maple syrup, Grade A Dark Color, Robust Taste maple syrup is produced as the days become warmer and longer in sugaring sea...

A light blue high density pipe that is similar to working with black water pipe. Due to the light, translucent material, you are able to see the sa...

A long handled nylon brush designed to clean the glass sight tubes on evaporators. From the tip of the brush to the end of the handle it measures 24".

1 1/4"x1 1/4"x1" Stainless Mainline Reducing Insert Tee

6" Elbow for Smoke Stack

With 8 cavities, this rubber mold shows the shape of the state of NH and has the letters NH on each candy. The cavity measures 1 3/4" wide across t...

M-125 Female Camlock 1 1/4"

A drum over-flow control valve for those producers that fill drums. The unit fits down into the drum and has an overflow hose with a hook on the en...

This is a Sugarhill plastic jug, printed for Vermont. The jug itself is grey, rather than almond, and the printed sugar house scene is brown. There...

31/64" Hole Cutter Drill

3/4" Stainless Tee w/Female Thread

1" Stainless Tee w/Female Thread

1"x1/2" Stainless Reducing Bushing

1 lb Roll of no lead Solder (stainless steel & tin solder). 

1/2" Leader Mainline Y

Food Grade Silicone Grease for Vacuum Extractors

A 2" tri-clamp. This is a replacement clamp for attaching 2 farrels together.

1/2" Stainless Union

4" U-Cup Gasket for RO Membrane.

1/2" Electric Diaphragm Pump.110v pump that will pump up to 5.3 gpm.Small enough to carry around. No warranty.

This book tells the true story of Luke and Layla as they learn from Grampy all about tapping maple trees and making maple syrup! A Sugar Slang glos...

Lapierre 5/16" End Line Tee (left side plugged)

2 3/8" Soft Rubber Leader Regulator Packing. Roughly 1/8" thick.

Stainless Insulation Clip

This is an almond D&G plastic jug. The front has a oval sugar house scene, bordered with "Pure VERMONT maple syrup" and the jug capacity infor...

2" Short Plastic Nipple

"Zap-Bac" Antibacterial Spout Adapter (green). Reduces a stubby spout from 7/16" to 5/16" (can be used for 2 years). It is recommended to use a 5/1...

1"x2 1/2" Stainless Nipple

1 1/2" Stainless Ball Valve

1 1/2" Short Plastic Nipple

M-127 Female Camlock 1" Cap Plug

This is a Sugarhill plastic jug, printed for New Hampshire. The jug itself is grey, rather than almond, and the printed sugar house scene is brown....