All Products [hidden]

3/4" x 500' roll of Black Plastic Mainline.

A thick white regulator packing that is a spongy rubber material. It is about a 1/4" thick and is 3 3/8" in diameter. Can be used in the hot or col...

9 Gauge Galvanized Wire 800' Roll

1" Stainless Tee w/Female Thread

1" Mainline Tee (Bottom Piece w/1/2" Threaded Hole to Fit Threaded Mainifold Top)

3" Dial 0 - 50 Degrees 9" Stem Thermometer

1/2" Leader Mainline Y

Connecticut Maple baseball hat, available in green or blue.

4 1/2" Diameter Dry Vacuum Gauge

A Christmas star, or a star for any other time of year. With this mold you can make up to 20 stars at a time. A nice bite-size piece of candy. Each...

2 3/8" Soft Rubber Leader Regulator Packing. Roughly 1/8" thick.

A leaf shaped grade sticker in the color reflecting the grade with VT grade information printed on it. 1 1/8" 

This simple VT grade label has all the pertinent information printed on a 7/8" circle sticker. The words are on a leaf backdrop, which reflects the...

Tubing Adapter Separator. For separating stubby spouts from adapters. It also has a spot that works as a hammer, and the piece on the top is for re...

Regular/daily soap wash, for during the sugaring season Dilution proportions generally require reaching a certain PH level, rather than a ratio num...

M-125 Female Camlock 1 1/2"

Hale Matton has been collecting spouts and other sugaring paraphernalia for almost 50 years. This book includes photographs of and information abou...

A 19/64" tapping bit that is a little longer than the other ones we sell. These bits are designed for a precision tapper, but also work in a standa...

1 1/2" Threaded PVC Valve

1 1/2" O-Ring for Vacuum Releaser.

The large skimmer is roughly 5.5" wide, and used for skimming things out of the evaporator. Many producers purchase a hardwood handle to put on the...

A 3/4" bung for stainless drums. This bung would be a replacement for the smaller bung that can be used as a vent on some drums.

Lapierre 5/16" End Line Tee (left side plugged)

You must be a member of the VT Sugar Makers Association to buy these jugs! This is an almond Sugarhill plastic jug, labeled for the Vermont Sugar M...

Black Plastic Cap 38 mm for Decanter Bottle, sold individually.

6" Elbow for Smoke Stack

6" Stainless Smoke Stack 4' in length.

1 1/4" Mainline Tension Grip

This is an almond D&G plastic jug. The front has a oval sugar house scene, bordered with "Pure VERMONT maple syrup" and the jug capacity infor...

A drum over-flow control valve for those producers that fill drums. The unit fits down into the drum and has an overflow hose with a hook on the en...

10" heavy duty wire ties for 2" pipe or smaller. 500/roll Recommended Tools: Tool for twisting ties                                             Aut...

3/4" Stainless Tee w/Female Thread

1"x1/2" Stainless Reducing Bushing

1 1/2" Short Plastic Nipple

3/4" Mainline Insert Elbow

M-122 Male Adapter 2"

M-120 Male Adapter 3/4"

Leader 1" Mainline Fitting

Vermont Maple baseball hat, available in green or blue.

This is an almond Sugarhill plastic jug, printed for Connecticut, with a gold on gold wrapped label. A sugar house is boldly outline against a more...

Sunflower Oil that is safe for those that are certified organic. It may not be as effective as some of the other defoamers, but if you are certifie...

Experience the natural sweetness and rich flavor of our 1 lb Bag of Pure Maple Sugar Sifted Granules. Carefully crafted from 100% pure maple syrup,...

1 1/4"x1 1/4"x3/4" Stainless Reducing Y

Extra Tubing Tool Knife Blade.

Bernard Vacuum Releaser Flap

1 1/4" Stainless Ball Valve

A small pumpkin with a happy jack-o-lantern on each one. There are 16 cavities on this mold. Each small pumpkin measures 1 1/4" wide x 1 1/4" tall....

New York Maple baseball hat available in green or blue.