All Products [hidden]

M-121 Female Camlock 3/4".

1/2" Stainless Union

1/2" Electric Diaphragm Pump.110v pump that will pump up to 5.3 gpm.Small enough to carry around. No warranty.

Formerly know as Grade B maple syrup, Grade A Dark Color, Robust Taste maple syrup is produced as the days become warmer and longer in sugaring sea...

1" Mainline Insert Tee

Stainless Insulation Clip

2" Triclamp Solid End Cap

1/2" Stainless Coupling w/Female Thread .

2" Short Plastic Nipple

H2O 19/64" Blue Spout for 5/16" tubing.

This saddle is for 1" mainline, and 5/16" tubing. Requires a 15/32" hole in the pipe to seal properly. Once the elbow is inserted all the way, the ...

With 8 cavities, this rubber mold shows the shape of the state of NH and has the letters NH on each candy. The cavity measures 1 3/4" wide across t...

3/4" x 500' roll of Black Plastic Mainline.

A thick white regulator packing that is a spongy rubber material. It is about a 1/4" thick and is 3 3/8" in diameter. Can be used in the hot or col...

9 Gauge Galvanized Wire 800' Roll

1" Stainless Tee w/Female Thread

1" Mainline Tee (Bottom Piece w/1/2" Threaded Hole to Fit Threaded Mainifold Top)

This simple VT grade label has all the pertinent information printed on a 7/8" circle sticker. The words are on a leaf backdrop, which reflects the...

3" Dial 0 - 50 Degrees 9" Stem Thermometer

1/2" Leader Mainline Y

Connecticut Maple baseball hat, available in green or blue.

4 1/2" Diameter Dry Vacuum Gauge

A Christmas star, or a star for any other time of year. With this mold you can make up to 20 stars at a time. A nice bite-size piece of candy. Each...

2 3/8" Soft Rubber Leader Regulator Packing. Roughly 1/8" thick.

A leaf shaped grade sticker in the color reflecting the grade with VT grade information printed on it. 1 1/8" 

Tubing Adapter Separator. For separating stubby spouts from adapters. It also has a spot that works as a hammer, and the piece on the top is for re...

Regular/daily soap wash, for during the sugaring season Dilution proportions generally require reaching a certain PH level, rather than a ratio num...

M-125 Female Camlock 1 1/2"

Hale Matton has been collecting spouts and other sugaring paraphernalia for almost 50 years. This book includes photographs of and information abou...

A 19/64" tapping bit that is a little longer than the other ones we sell. These bits are designed for a precision tapper, but also work in a standa...

Vermont Maple baseball hat, available in green or blue.

1 1/2" Threaded PVC Valve

1 1/2" O-Ring for Vacuum Releaser.

The large skimmer is roughly 5.5" wide, and used for skimming things out of the evaporator. Many producers purchase a hardwood handle to put on the...

A 3/4" bung for stainless drums. This bung would be a replacement for the smaller bung that can be used as a vent on some drums.

Lapierre 5/16" End Line Tee (left side plugged)