All Products [hidden]

3/4" Brass Check Valve w/Female Thread

3/4" Street Elbow 45 Degree

1 1/4" Street Elbow 45 Degree

0-300psi Pressure Gauge for RO. Used on the Leader Micro2 RO and some other models as well. 

9" SS Smoke Stack 4' long.

8" Stainless Steam Stack.

22" Stainless Smoke Stack.

9" Rope Operated Stack Cover.

3" PVC Reducing Bushing (spigot x FPT).

1 1/2" PVC 45 Degree Elbow (slip x slip)

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

Pure Maple Syrup For Sale Here RI Sign 18"x24"

1 1/2" x 1 1/4" x1 1/4" Reducing Insert Tee

1 1/4"x1 1/4"x3/4" Mainline Reducing Tee

1/2"x3/4"x1" Reducing Insert Tee

1" Barbed Plastic Cross

2" Barbed x 2" FPT Plastic Elbow

1 1/4" Barbed x 1 1/4" FPT Plastic Elbow

A Leader forced draft grate that is 30" long and 8" wide.

Drill only for 3/8" Hole Cutter

Half Pint Arch Extension to make it a 48" Arch. This extension bolts on to the back of a 1/2 pint arch and enables someone to put a 2'x4' pan on th...

10" Filter for Airablo Oil Reclaimer. This filter is 6.5" in diameter and about 15" long. This filter goes inside the oil reclaimer.

2'x6' Lapierre Vision Evaporator with Classic PansLapierre's VISION line is designed for hobby or smaller sugarmakers or those without electricity....

Leader 2x4 Vermonter Pan (raised flue)

2x6 Set of WSE Raised Flue Pans w/Fitting Kit. While we try to keep this item in stock, you should call for availability.

Leader WSE 2’ x 6’ Evaporator The Leader WSE is tig welded of 20 gauge bright annealed stainless steel solid stainless steel connections, and clamp...

2’ x 6’ complete evaporator consisting of stainless 2’ x 4’ pan with7” raised flues and sap level regulator, 2’ x 2’ stainless cross flow syrup pan...

Small Sap Regulator Bridge.

Plastic Hand Pump Bottom Base

Small Brothers Flue Pan Regulator Arm

This is a new 30"x30" welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the e...

16" x 24" Canner Shelf Only

A replacement ring for a filter press with a hand pump. This is the ring that holds the diaphragm in place and the handle attaches too. This ring i...

This CDL cream machine with a 3/4 hp stainless steel pump running on 110 V is capable of making up to 1.5 gallons of cream at a time. This cream ma...

This is the stainless auger for a Grimm/Leader candy machine. This worm sits in the trough and moves/mixes the syrup along.

This would be the trough that the worm sits in on a Grimm/Leader candy machine. Comes with the valve, but the worm is sold seperate.

1 1/2" Black Plastic Mainline (500' Roll). The ID is 1 1/2". This pipe is rated for 125 psi.

40 Gallon Lapierre Water Jacketed Canner with Stand. Comes with 4 bottling valves, 2 heating elements and sight gauges for syrup and the water leve...

24"x33" Leader 1/2 Pint 3 Section Syrup Pan, New (factory second). Dented on the side and also one corner by the draw-off fitting. 

Horizontal Vacuum Releaser (up to 6,000 Taps) These are the most reliable sap extractor units on the market. When connected to a vacuum pump, these...

Used 12" Round CDL Vacuum Filter Press. 

Used BHR Hobby Double Vacuum Releaser for up to 1,000 taps.

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

Used Leader 1 Cone Filter Tank w/Cover and Valve. This is a welded filter tank that comes with a valve and a wooden crate for storage. 

30"x18" Leader Welded Cross Flow Syrup Pan (New). With open boxes and threaded drawoff fittings.

Conde #14 Dairy Pump with Briggs & Stratton Gas Motor

NH Magnet with Maple Leaf Cutout. Roughly 3.5" tall x 2" wide. 

VT Magnet with Maple Leaf. Roughly 3 1/2" tall x 2 3/8" wide.