All Products [hidden]

A replacement ring for a filter press with a hand pump. This is the ring that holds the diaphragm in place and the handle attaches too. This ring i...

This CDL cream machine with a 3/4 hp stainless steel pump running on 110 V is capable of making up to 1.5 gallons of cream at a time. This cream ma...

This CDL cream machine with an acetal (plastic) pump is capable of making up to 1.5 gallons of cream at a time. It runs off of 110V. The pump mixes...

This is the stainless auger for a Grimm/Leader candy machine. This worm sits in the trough and moves/mixes the syrup along.

This would be the trough that the worm sits in on a Grimm/Leader candy machine. Comes with the valve, but the worm is sold seperate.

1 1/2" Black Plastic Mainline (500' Roll). The ID is 1 1/2". This pipe is rated for 125 psi.

24"x33" Leader 1/2 Pint 3 Section Syrup Pan, New (factory second). Dented on the side and also one corner by the draw-off fitting. 

Horizontal Vacuum Releaser (up to 6,000 Taps) These are the most reliable sap extractor units on the market. When connected to a vacuum pump, these...

Used BHR Hobby Double Vacuum Releaser for up to 1,000 taps.

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

30"x18" Leader Welded Cross Flow Syrup Pan (New). With open boxes and threaded drawoff fittings.

Used Leader Mini Micro RO Machine

Used Leader Micro2 RO Machine with Wash Tank.  This was originally a Micro1 that was expanded to a Micro2. 

Used Leader 1/2 Pint Supreme Pan 24"x33" (Excellent).

Used 7" Wes Fab Short Stack Filter Press with Gear Pump & Partial Box of Papers

D&G Can Sealer Kit (includes a case of 200 cans, sealer, & 25 shippers)

13.2 Gallon Used Stainless Keg.

 2'x4' Suspended SS Hood (Amish Made). 12" Stack size on this hood. 

1 1/2" - 2" Y Strainer Screen for a plastic inlet filter.

DISCONTINUED-Valve Tip for Hands Free Bottler. 1/2" Male threads and then the tip is roughly 3/8". 

3/8" Brass Threaded Plug

2"x1/2" Stainless Threaded Reducing Bushing

O Ring Kit for BHR Hobby Vertical Double Releaser. Includes 12 total o-rings. 

Tanaka Pump Hose Coupling

Male Garden Hose x 1/2" Male Pipe Thread.

1 1/2" x 1/2" Stainless Thread Reducing Bushing.

Pump Priming Plug for a Tanaka Pump

Gasket for 2" Bulkhead Fitting

Black Gas Cap for Newer Tanaka Tapper. 

White Metal Backer for Home Sweet Home Sign

2" Mainline Insert Tee.

Clip for Lapierre Super Saddle

1/8" Plastic Compression Fitting. The end with threads and the nut is 1/4" threads. 

8"x40" Membrane Storage Cannister.

28mm Gold Tamper Evident Cap for Acero Glass

Orange Metal Backer for State Signs. This backer, really makes the maple leaf pop. 

Drip Tray for a Wes Fab Short Stack 7" Filter Press. A stainless pan that measures 12"x10"x2 1/2".

2" Mainline Tension Grip.

Belt for Full Size Wes Fab Filter Press.

Gold Caps for Nu Can Barrel Glass (24mm). These covers fit items #GLBAR125 and GLBAR250. 

SKF Spider for Lovejoy Coupling

Hand Filter Press Pin Set

White Metal Cover for 1 LB Printed Cream Jars.  These covers do not fit the plain glass cream jars, only the printed ones. 

1" Feed Pipe Elbow for Cold Sap Inlet

Right Fire Door for Leader 2' Arch (with 2 doors). Sold as Is

7" Filter Press Stop Plate for blocking off part of a filter press. 

Slide Gate for Syrup Pan. Designed to hang over a partition in a pan, and block off a channel.  Not sure what pan it was designed for, or would wor...

Sap Level Gauge Bracket - While Supply Lasts. Used to hold the top of a sight gauge on a Leader drop flue pan.