All Products [hidden]

A stainless welded pan for a Leader cream machine. Some producers prefer to have an extra pan so that they might have multiple batches going at the...

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

An evaporator for the back yard producer. This evaporator comes with a stainless wood fired arch, with grates, cast iron door, and a stainless base...

3/4 HP Electric Vacuum Pump w/Oil Flood System

Tank Band for 525 gal, 725 gal, or 1025 gal Tank

A 4-wheeled drum cart for moving syrup drums around. This cart makes moving drums so much easier than trying to roll them around by hand. It has a ...

Double Draw-off Nozzle 2" Tri-clamp Fittiting. Easily switch from one side of a draw-off tank to the other without having to move the tank. Roughly...

2" Off Centered Triclamp Ferrule (2" x 1 1/2").

8"x30" Electric Moisture Trap 2". Just like a mechanical moisture trap it has a float in it, but being electric it also has a pill switch that gets...

8"x30" Mechanical Moisture Trap with 2" Ports. This moisture trap has a float that will come up and cause the gasket to seal against the vacuum lin...

12"x36" H2O Vertical Electric Vacuum Releaser w/One 1/2 HP Pump. Will pump sap up roughly 12' in elevation. Good for up to 2000 taps.

18"x36" H2O Horizontal Electric Vacuum Releaser w/Manifold and three 1 HP Pumps. The back manifold has 6 - 1 1/4" holes in it for hooking up sap li...

Kwik 5 HP Electric Rotary Vane Vacuum Pump. Single Phase 28 cfm @ 20" InHg, max 29" InHg.

Kwik 3 HP Electric Rotary Vane Vacuum Pump. Single Phase 18 cfm @ 20" InHg, max 29" InHg.

18"x36" H2O Vertical Electric Vacuum Releaser w/Manifold and two 1 HP Pumps. The back manifold has 6 - 1 1/4" holes in it for hooking up sap lines....

The special formula in this high density material reduces the weight, while maintaining its rigidity.

10" H2O 3 Frame Filter Press with an Electric Diaphragm Pump.

Used 1/3 HP Electric Motor for Filter Press.

The special formula in this high density material reduces the weight, while maintaining its rigidity.

525 Gallon Horizontal Plastic Tank with a 2" Drain. This tank has a 16" cover. The tank measures 49" wide x 74" long x 54" high.  This tank will co...

Base Stack for a 40" Wide Arch Stainless .

Airablo Vacuum Pump Flood Oil (5 gal. pail) for 3 hp and smaller Airblo Pumps.

2'x4' Stainless Hood.

2,111 Gallon Lapierre Stainless Tank (5'Wx16'Lx50 1/2"H).

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

Base Stack for a 36" Wide Arch Stainless

A Leader clear plastic filter press. This press has 5 frames and comes with an air diaphragm pump. The plastic does not absorb the heat like the al...

Base Stack for a 72" Wide Arch Stainless

Base Stack for a 60" Wide Arch Stainless

Base Stack for a 48" Wide Arch Stainless

2" Brass Check Valve w/Female Thread

1 1/2" Poly Pipe w/Nylon Cord

Atlas Copco Vacuum Pump Oil (gallon) Synthetic Oil.

H2O Vertical Electric Releaser with 1/2 HP Submersible Pump and a Manifold (12"x36"). The 1/2 HP pump will pump up in elevation 10'. The back manif...

1 1/4" Plastic Check Valve (slip x slip)

1/2" x 1/2" Plastic Female Threaded Coupling

1 1/4" x 6" Stainless Threaded Nipple

1 1/4" Barbed x 1 1/4" MPT Plastic Check Valve

H2O Vertical Electric Releaser with 1 HP Pump, 12"x36" (no manifold). 15 gpm pump capable of pumping up to 30' in elevation. Sap inlet height of 21...

Universal SS Leader Vacuum Releaser Support for a 4' Tank.

Lapierre (small) Horizontal Single Releaser (for up to 1500 taps). It has 7 - 1" holes drilled in the back manifold.

H2O Viper Stainless Electric Vacuum Releaser w/One 1/2 HP Pump and Integrated Cleaning Nozzle (15 gpm pump) for up to 2,500 taps. This releaser is ...

H2O Horizontal Electric Vacuum Releaser with Manifold. With a 1/2 hp Submersible pump. Good for pumping up to 10' in elevation and good for roughly...

CDL 3 HP Vacuum Pump, Oil Cooled Vane-Pump for up to 3,000 Taps.

CDL 1 1/2 HP Vacuum Pump Oil Cooled Vane Pump for up to 1,000 taps.

1 1/4" Y Strainer.

O-Ring Kit for Horizontal Single Bernard Vacuum Releaser.

Grey Button on top of Releaser Float Rod.