All Products [hidden]

1 1/2" Mainline Combo Tee (1 1/2" insert x 1 1/2" male thread x 1 1/2" insert)

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 39.25" long and...

H2O Dual Compartment Insulated Draw-off Tank on Wheels. Comes with two 20 Gallon Compartments that have an overflow in them, and sliding covers on ...

The Leader grate looks like a double V. It measures 48" long and is 4.5" wide. The ends are about 1.5" thick.

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 48" long and 4"...

All new containers come with caps. A white cover that has holes in the top so it can be used as a shaker that fits the older 1 pound honey jars wit...

1/2" Inlet Fitting for Hand Pump with Female Thread.

2'x4' Leader Vermonter Evaporator w/Raised Flue Pan. Comes with a stainless natural draft arch and 9' of stainless stack. It is all one pan with 10...

Single pan with shallow raised flues in the back, and 3 divided flat sections in the front. Comes with a float box. Capacity 40-80 taps. Requires 5...

1/2" Outlet Fitting for Hand Pump w/Female Thread.

1/2 Pint Leader Oil Fired Arch w/Oil Burner and Insulation. Comes with a Carlin Oil Burner, and the arch is lined with ceramic blanket. Takes a 24"...

A complete Leader 1/2 Pint evaporator. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. The arch is made fr...

16"x48" Lapierre Propane Evaporator w/Welded (raised flue) Pans and three 65,000 btu Burners

This is a new 4'x4' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

This is a new 3'x3' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

SB 1 1/2" Aluminum Yoke for Hot Sap Regulator

This would be just the pig for a Grimm/Leader candy machine. This pan is welded and has the valve on the snout.

This rubber candy mold mat contains 80 cavities of a little man. Each cavity measures 1 1/8" wide x 3" tall. Pairs nicely with the little maid (CML...

This rubber candy mold contains 80 cavities of a little maid. Each cavity measures 1 1/4" wide x 2 3/4" tall. Pairs nicely with the little man (CML...

3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...

1 1/2" Black Plastic Mainline (500' Roll). The ID is 1 1/2". This pipe is rated for 125 psi.

A 10' wide blower unit designed to go over an over-head door and provide a curtain of air to keep pests out of the room or building.

14" Stainless Roof Jack, Leader Style, 10/12 Pitch, Side mount.

Used 325 Gallon Horizontal Plastic Tank with a 2" Drain. This tank has a 16" cover on top. The tank measures 38" wide x 68" long x 43" high.

12"x16" Vertical Vacuum Booster. Both ends are screwed on. Open to offers on this item.

4'x6' Leader American (welded) Syrup Pan. This pan is in very good condition.

Used 8" Galvanized Smoke Stack Tee

Steam Kettle, Vulcan Hart Corp. Model SL40. We believe it may hold 40 gallons, but not sure of that.

Lapierre Vertical Single Hobby Releaser. Good for a couple hundred taps or less.

Hanna Light Transmittance Machine w/Extra Vials (new)

Grimm Round Drawoff Tank on Stand, SS Lead Free Soldered w/1" SS Valve and Hose (13"x34").

550 Gallon Plastic Vertical Tank. It has a 2" drain fitting (female threads) down near the bottom. There are several holes drilled in the top of th...

Brown Plastic Candy Divider Tray with 8 Cells. Outside dimensions are 2.5"x 5" and are 3/4" tall. 

Brown Plastic Candy Divider Tray 9 Cell. Outside dimensions are 3.75"x 3.75" and are 3/4" tall. 

3" Stainless Tri Clamp Valve