All Products [hidden]

2" in diameter; 8" tall for use with the Short Syrup Hydrometer

Medium Gold Elastic Tie 100/pk

These 1" stainless steel clamps work well any place you have a fitting in your mainline. They can be tightened with a regular screwdriver, and will...

A saddle for 1" pipe that has a stainless clamp and is made for 5/16" tubing. Will work with a 5/16" hole up to 31/64" hole depending on which side...

The same shape as one of our most popular glass bottles, this decorative bottle holds slightly more than 8oz. It has a printed sugar house scene on...

This is an almond Sugarhill plastic jug with a colored sugaring scene wrapped around it. The jug does not have a state name printed on it, so it ma...

6-Way Threaded Manifold Top Only with 5/16" Tubing Barbs.

A 16 ounce glass Mason jar with a handle. This is a popular container, practical and easy to carry, with many different uses: syrup, candy, cream, ...

A plain glass jug with a handle and holds 64 ounces. The jug is 4.75" in diameter and is 10.5" tall. The height for a label on this jug is about 5"...

A gold foil that fits over the cover on a 24mm and 28mm bottle. This foil is pressed on and manually molded to the shape of the bottle neck. These ...

This simple US grade label has all the pertinent information printed on a 7/8" circle sticker. The words are on a leaf backdrop, which reflects the...

This is a Sugarhill plastic jug, almond colored, without any print, so you are able to apply your own label and information.  Black tamper evident ...

This is a Sugarhill plastic jug, almond colored, without any print, so you are able to apply your own label and information.  Black tamper evident...

A glass bottle in the shape of a maple leaf. The back of the bottle is smooth so you can put a label on it, or you could use a hang tag. The bottle...

This simple US grade label has all the pertinent information printed on a 7/8" circle sticker. The words are on a leaf backdrop, which reflects the...

Using a pan gasket will help you get a tighter seal between the arch and pans to keep the heat where you want it, under the pans. This gasket is us...

5/16" End Line Ring

This is an almond Sugarhill plastic jug, printed for New York, with a colored sugaring scene wrapped around it. There is a description on the uses ...

A 19/64" drill bit for tapping. These bits come down from Canada and have been designed to drill into frozen wood. This is the drill bit used by th...

A 7/16" drill bit for tapping. These bits come down from Canada and have been designed to drill into frozen wood.

All new containers come with caps. A gold plastic cover with a tamper evident ring. This cover fits the 50ml maple leaf glass as well as some other...

5/16" Leader/H2O End Line Tee w/Right Hand Plug (red).

This is an almond Sugarhill plastic jug, printed for Connecticut, with a gold on gold wrapped label. A sugar house is boldly outline against a more...

A glass LaBasqu bottle with a red, covered bridge printed on the front. There is room to put a label on the back of the bottle, though many people ...

Tool for Twisting Wire Ties

A plastic shaker that will hold 12 oz of granulated sugar. Red caps are the default color included with any order. However white is also available ...

This is an almond Sugarhill plastic jug, printed for Massachusetts. There is a table display and window scene, through which is visible a sugar hou...

A flat hang tag with a pre-punched hole in the upper left hand corner. "The World's Best All Natural Sweetener 100% Pure Maple Syrup" is printed on...

This is an easy to read maple syrup label sticker with a curved top and flat bottom edge. It has an image of three differently colored maple leaves...

A hydrotherm combines a hydrometer and a thermometer into one unit. Just float the hydrotherm in syrup and when the red/blue line is level with the...

Rubber Gloves for Hot Syrup or Water, 12" from finger tip to end of the cuff. These gloves work great for cleaning a filter press or for cleaning e...

3-Way Threaded Manifold Top Only with 5/16" Tubing Barbs

Screw for CDL Multi Fittings

Brix scale, 1°-12° Brix calibrated at 38° F. Divided into 1/10° Brix increments. State of Vermont inspected Hydrometers are fragile, glass instrume...

CDL 7/16" Tubing Spout

This is an almond Sugarhill plastic jug, printed for Massachusetts. There is a table display and window scene, through which is visible a sugar hou...

3/16" Two Hand Tubing Tool

Round 9" Vacuum Syrup Filter Press. Good for producers making small amounts of syrup each day. There is not much surface area on one of these filte...

This is the medium-sized maple leaf. There are 12 cavities in a mold. Each maple leaf is 1 ounce of candy. They measure 1 7/8" wide x 1 7/8" tall. ...

This is an almond Sugarhill plastic jug, printed for Connecticut, with a gold on gold wrapped label. A sugar house is boldly outline against a more...

1-Hand Line Viper Tubing Tool for 3/16" Tubing.

CDL 3/16" End Line Tee (plugged on one side)

There is a decorative bottle with small handle on the bottle and a maple leaf engraved both the front and back of the bottle. The bottle measures a...

You must be a member of the VT Sugar Makers Association to buy these jugs! This is an almond Sugarhill plastic jug, labeled for the Vermont Sugar M...

Middle Valley Clear 5/16" Arc Barbed Spout. The Barbed end goes into the tree for a better seal without blocking off so much wood in the tap hole. ...

A gold colored heat shrink capsule that fits over a 24 mm cover. This capsule can be used to dress up a bottle as well as provide a tamper evident ...

A box of 400 papers that fit a 7" filter press. Does NOT fit the plastic filter presses.

12" tall; 2" diameter