All Products [hidden]

This is a new 30"x30" welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the e...

16" x 24" Canner Shelf Only

A replacement ring for a filter press with a hand pump. This is the ring that holds the diaphragm in place and the handle attaches too. This ring i...

This CDL cream machine with an acetal (plastic) pump is capable of making up to 1.5 gallons of cream at a time. It runs off of 110V. The pump mixes...

This is the stainless auger for a Grimm/Leader candy machine. This worm sits in the trough and moves/mixes the syrup along.

This would be the trough that the worm sits in on a Grimm/Leader candy machine. Comes with the valve, but the worm is sold seperate.

24"x33" Leader 1/2 Pint 3 Section Syrup Pan, New (factory second). Dented on the side and also one corner by the draw-off fitting. 

Horizontal Vacuum Releaser (up to 6,000 Taps) These are the most reliable sap extractor units on the market. When connected to a vacuum pump, these...

Used BHR Hobby Double Vacuum Releaser for up to 1,000 taps.

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

30"x18" Leader Welded Cross Flow Syrup Pan (New). With open boxes and threaded drawoff fittings.

Used 2'x4' Leader Gas Finisher with Welded Pan & Cover.

Used Sap Refractometer

Used 3'x30" Stainless Table.

Used 7" Leader Full Stack Aluminum Filter Press with a Bronze Gear Pump

Used CDL 18" Wide Preheater Pan with Valve

Used 18"x48" CDL Wood Fired Arch (Bricked) with a Lapierre Accordion Pan and Float

Used Busch Vacuum Pump, Model 1252, No Motor (pulls roughly 23") Sold As Is.

Used Busch Vacuum Pump, Model 1202, 3 Phase (pulls roughly 23") Sold As Is. Comes with just one of the Air filters pictured. 

Used 1,023 Gallon CDL Stainless Tank (4'x14'x3')

Used 12" CDL Vacuum Filter Press

Used Smokey Lake Auto-Draw with Stack Temperature. Comes with a 3/4" Motorized Valve. 

Used Leader Bolt On Float System for a 1/2 Pint Pan. The Float measures 5.5" x 10.5".

Used 351 Gallon CDL Stainless Tank (4'x6'x2.5')

Used 425 Gallon Poly Pickup Truck Tank.

Used 550 Gallon Vertical Plastic Tank

Used Marcland Automatic Draw-off with a motorized valve. Comes with a stainless bracket, designed to hook to clip under the lip of a Leader flue pan. 

Used Leader Exac Tap for Dewalt Drill (like new). See picture for which DeWalt Drills this will fit .

Leader Cold Sap Float Box & Regulator

Used 5'x6' Leader Revolution Syup Pan (Left Draw) with Float Box and Fittings

Used 1" Predator Gas Powered Sap Pump. Does not seem to want to start. Sold as is. 

Used Airablo Vacuum Releaser with 1/2 hp Electric Submersible Pump.

Used 425 Gallon Poly Pickup Truck Tank. This tank has a 2" Bulkhead fitting and elbow on the top for pumping into. 

Used Leader Mini Micro RO Machine

Used 7" Wes Fab Short Stack Filter Press with Gear Pump & Partial Box of Papers

 2'x4' Suspended SS Hood (Amish Made). 12" Stack size on this hood.  The tabs that are on the inside of the hood are 24" wide, the outside to the o...