All Products [hidden]

1/2" Outlet Fitting for Hand Pump w/Female Thread.

2’ x 6’ complete evaporator consisting of stainless 2’ x 4’ pan with7” raised flues and sap level regulator, 2’ x 2’ stainless cross flow syrup pan...

Small Sap Regulator Bridge.

1/2 Pint Leader Oil Fired Arch w/Oil Burner and Insulation. Comes with a Carlin Oil Burner, and the arch is lined with ceramic blanket. Takes a 24"...

A 24"x33" Supreme pan that is 3 sections with the outside compartments being flat and the middle compartment containing shallow drop flues. There a...

A complete Leader 1/2 Pint evaporator. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. The arch is made fr...

16"x48" Lapierre Propane Evaporator w/Welded (raised flue) Pans and three 65,000 btu Burners

Small Brothers Flue Pan Regulator Arm

This is a new 4'x4' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

This is a new 3'x3' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

This is a new 30"x30" welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the e...

SB 1 1/2" Aluminum Yoke for Hot Sap Regulator

This CDL cream machine with a 3/4 hp stainless steel pump running on 110 V is capable of making up to 1.5 gallons of cream at a time. This cream ma...

This would be just the pig for a Grimm/Leader candy machine. This pan is welded and has the valve on the snout.

This rubber candy mold mat contains 80 cavities of a little man. Each cavity measures 1 1/8" wide x 3" tall. Pairs nicely with the little maid (CML...

This rubber candy mold contains 80 cavities of a little maid. Each cavity measures 1 1/4" wide x 2 3/4" tall. Pairs nicely with the little man (CML...

3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...

1 1/2" Black Plastic Mainline (500' Roll). The ID is 1 1/2". This pipe is rated for 125 psi.

40 Gallon Lapierre Water Jacketed Canner with Stand. Comes with 4 bottling valves, 2 heating elements and sight gauges for syrup and the water leve...

Used Leader 1/2 Pint Welded Syrup Pan w/Valve

Used 7" Wes Fab Full Stack Aluminum Filter Press with Gear Pump.

A 10' wide blower unit designed to go over an over-head door and provide a curtain of air to keep pests out of the room or building.

Horizontal Vacuum Releaser (up to 6,000 Taps) These are the most reliable sap extractor units on the market. When connected to a vacuum pump, these...

Used Electric Single Diaphragm Vacuum Pump with 1.25" inlet and outlet. No releaser needed.

14" Stainless Roof Jack, Leader Style, 10/12 Pitch, Side mount.

Used 80 GPM Flow Meter.

Used 325 Gallon Horizontal Plastic Tank with a 2" Drain. This tank has a 16" cover on top. The tank measures 38" wide x 68" long x 43" high.

12"x16" Vertical Vacuum Booster. Both ends are screwed on. Open to offers on this item.

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

Used 2" Leader Vacuum Regulator with Weight.

4'x6' Leader American (welded) Syrup Pan. This pan is in very good condition.

Used 8" Galvanized Smoke Stack Tee

Steam Kettle, Vulcan Hart Corp. Model SL40. We believe it may hold 40 gallons, but not sure of that.

Hanna Light Transmittance Machine w/Extra Vials (new)

Grimm Round Drawoff Tank on Stand, SS Lead Free Soldered w/1" SS Valve and Hose (13"x34").

Stainless Bag Filter for Sap. Uses 7"x32" bags.