All Products [hidden]

This is a Sugarhill plastic jug, printed for Vermont. The jug itself is grey, rather than almond, and the printed sugar house scene is brown. There...

All new containers come with caps. A flat black cover that is 31.5 mm in size. This cover fits the 250ml, 500ml, and 1,000ml Gallone glass bottles,...

These 3/4" stainless steel clamps work well any place you have a fitting in your mainline. They can be tightened with a regular screwdriver, and wi...

This is a Sugarhill plastic jug, printed for New Hampshire. The jug itself is grey, rather than almond, and the printed sugar house scene is brown....

A plastic shaker that will hold 12 oz of granulated sugar. Red caps are the default color included with any order. However white is also available ...

All new containers come with caps. A gold plastic cover with a tamper evident ring. This cover fits the 50ml maple leaf glass as well as some other...

A dry powder defoamer for your evaporator. Just sprinkle a few grains into the evaporator to keep the foam down in the pans. Works well with the de...

This thin rubber packing is used for the cold sap regulator on many of the Leader and Grimm evaporators. Leader has also started using it on the re...

1/2" stainless ball valve

A flat hang tag with a pre-punched hole in the upper left hand corner. "The World's Best All Natural Sweetener 100% Pure Maple Syrup" is printed on...

This is an almond Sugarhill plastic jug, printed for Connecticut, with a gold on gold wrapped label. A sugar house is boldly outline against a more...

A glass LaBasqu bottle with a red, covered bridge printed on the front. There is room to put a label on the back of the bottle, though many people ...

3/4" Mainline Coupling

CDL 7/16" Tubing Spout

This is an easy to read maple syrup label sticker with a curved top and flat bottom edge. It has an image of three differently colored maple leaves...

3/4" Stainless Steel Insert Coupling

CDL 3/16" End Line Tee (plugged on one side)

This is an almond Sugarhill plastic jug, printed for New York, with a tri-colored sugaring scene wrapped around it. There is a description on the u...

1" Stainless Steel Insert Coupling

This is a Sugarhill plastic jug, printed for Vermont. The jug itself is grey, rather than almond, and the printed sugar house scene is brown. The...

Insulating Arch Board 1" thick by 12" wide and 3' long. The arch board is used to line the arch before the firebrick is placed in the arch. It is s...

A decorative bottle with a maple leaf on the front. The bottle has a base of 2.75" x 1.75", with a height of 10", and holds 500 ml or 16.9 ounces. ...

M-125 Female Camlock 1"

This is an almond Sugarhill plastic jug, printed for Massachusetts. There is a table display and window scene, through which is visible a sugar hou...

12" tall; 2" diameter

5/16" H2O Tee with Cup Plug.

A 20" cartridge 5 micron filter used to filter sap before it goes into an RO. Sold individually. There are 20 filters in a full case.

This is a Sugarhill plastic jug, printed for New Hampshire. The jug itself is grey, rather than almond, and the printed sugar house scene is brown....

Medium Wire Gripple for High Tensile Wire

This is a grey Sugarhill plastic jug, printed for New Hampshire, with a sap collecting scene and sugar house wrapped around it. A drawing of the Ol...

A plain round glass jar which holds 8 ounces (weight) of maple cream. Sold by the case. (12/case) Covers included. Click for replacement covers

4-Way Threaded Mainifold Top Only with 5/16" Tubing Barbs

A saddle for 1/2" pipe that has a stainless clamp and is made for 5/16" tubing. Will work with a 5/16" hole up to 31/64" hole depending on which si...

There is a decorative bottle with small handle on the bottle and a maple leaf engraved both the front and back of the bottle. The bottle measures a...

This is an almond Sugarhill plastic jug with a tri-colored sugaring scene wrapped around it. The jug does not have a state name printed on it, so i...