All Products [hidden]

The Leader grate looks like a double V. It measures 48" long and is 4.5" wide. The ends are about 1.5" thick.

A Leader forced draft grate that is 30" long and 8" wide.

Drill only for 3/8" Hole Cutter

Half Pint Arch Extension to make it a 48" Arch. This extension bolts on to the back of a 1/2 pint arch and enables someone to put a 2'x4' pan on th...

2'x6' Lapierre Vision Evaporator with Classic PansLapierre's VISION line is designed for hobby or smaller sugarmakers or those without electricity....

Leader 2x4 Vermonter Pan (raised flue)

2x6 Set of WSE Raised Flue Pans w/Fitting Kit. While we try to keep this item in stock, you should call for availability.

Leader WSE 2’ x 6’ Evaporator The Leader WSE is tig welded of 20 gauge bright annealed stainless steel solid stainless steel connections, and clamp...

2’ x 6’ complete evaporator consisting of stainless 2’ x 4’ pan with7” raised flues and sap level regulator, 2’ x 2’ stainless cross flow syrup pan...

Small Sap Regulator Bridge.

Plastic Hand Pump Bottom Base

Small Brothers Flue Pan Regulator Arm

This is a new 30"x30" welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the e...

16" x 24" Canner Shelf Only

A replacement ring for a filter press with a hand pump. This is the ring that holds the diaphragm in place and the handle attaches too. This ring i...

This CDL cream machine with an acetal (plastic) pump is capable of making up to 1.5 gallons of cream at a time. It runs off of 110V. The pump mixes...

This is the stainless auger for a Grimm/Leader candy machine. This worm sits in the trough and moves/mixes the syrup along.

This would be the trough that the worm sits in on a Grimm/Leader candy machine. Comes with the valve, but the worm is sold seperate.

24"x33" Leader 1/2 Pint 3 Section Syrup Pan, New (factory second). Dented on the side and also one corner by the draw-off fitting. 

Horizontal Vacuum Releaser (up to 6,000 Taps) These are the most reliable sap extractor units on the market. When connected to a vacuum pump, these...

Used BHR Hobby Double Vacuum Releaser for up to 1,000 taps.

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

30"x18" Leader Welded Cross Flow Syrup Pan (New). With open boxes and threaded drawoff fittings.

Used 2'x4' Leader Gas Finisher with Welded Pan & Cover.