Products

Heavy Duty Hand Crank Winch. Sold individually.

Used Homemade Moisture Trap. Has a ball inside and 1" threaded inlet/outlet. This moisture trap is made out of PVC and is all glued together. 

Homemade Stainless Vacuum Booster Tank. This tank does have some fittings that have been broken off in it when they were removed.

Lapierre Triple Pan Washer w/Tank, 1 HP Gould Pump and 3) 6'x2' Covers w/Spinners.

Leader 3'x5' Aluminum Hood with Preheater. The Preheater appears to be homemade. 8" Thimble on the hood, and it comes with 1 section of stack. 

Leader Half Pint Evaporator w/SS Syrup Pan, SS Preheater Pan and Valves. The pans are welded. The back of the arch has been patched around the coll...

Used Leader Mini Extreme RO Machine w/Two 4" Membranes and Two Extra Membranes. This machine comes with the wash tank mounted on the RO.

Leybold Vacuum Pump, Oil Cooled, 110 Volts (for up to 600 taps)

Marcland Tank/High Level Alarm.  Just hook up a Romex or thermostat wire and put the other end of the wire in a tank. When the liquid level hits th...

Micro 3 RO Machine with Three - 4" Membranes. This unit was a micro2 that had a third post added and is set up on wheels. Was taken in on trade tow...

New Airablo Horizontal Electric Releaser with 2-0.5hp 12 gpm 75psi internal pumps. Good for up to 4-5,000 taps.

Propane Gas Burner Only (for a 16"x16" pan), NEW. Comes in a box that you assemble. Roughly 15.5" square and stands 13" high. 

RO Bucket Kit (RB25) for 200 +/- Taps. It has 5 - 8gph membranes. Mounted on a wooden board that is roughly 4' long and from the floor to the top o...

Small Homemade Stainless Round Draw-off Tank w/Valve (10 1/2" diameter x 20" high).

Stainless Bag Filter for Sap. Uses 7"x32" bags.

Stainless Milk Pail with Handle. The bottom has been repaired, but it still leaks.

Steam Kettle, Vulcan Hart Corp. Model SL40. We believe it may hold 40 gallons, but not sure of that.

Used 1 1/2 HP Airablo Oil Cooled Vacuum Pump with Oil Reclaimer.

Used 1.5" Stainless Triclamp Ball Valve.

Used 1/3 HP Electric Motor for Filter Press.

Used 125 Gallon Horizontal Plastic Tank w/Valve

14" Roof Jack, Sidemount w/Collar, 5/12 Pitch

Used 18" Stainless Steam Stack. 3' section.

Used 2" Leader Vacuum Regulator with Weight.

Used 30 Gallon Stainless Syrup Drum.

Used 35 Gallon Plastic Horizontal Tank.

Used 425 Gallon Plastic Pickup Tank. There is a hole in the cover that has been taped over. Comes with a 2" valve on the tank. 

Used 5/16" Hole Cutter Drill

Used 7 1/2" Leader Plastic Filter Press w/5 Frames and an Air Diaphragm Pump.

Used 8" Galvanized Smoke Stack Tee

These used aluminum buckets hold roughly 2 - 2.5 gallons of sap. Many of these buckets have smaller holes for hanging on the trees and work better ...

Used BHR Hobby Double Vacuum Releaser for up to 1,000 taps.

Used BHR Vertical Double Vacuum Releaser. Good for up to 2,500 taps. 

Used Cast Soule or Warner Spout.

Used CDL 9" Vacuum Filter Press. This vacuum press does not come with any filters. 

D&G 600 GPH RO Machine with a New 8" Membrane. This machine has a 1hp feed pump and a 5hp high pressure pump.

Used Electric Single Diaphragm Vacuum Pump with 1.25" inlet and outlet. No releaser needed.

Used Leader Tubing Reel with Hook. This tubing reel is still in excellent shape. 

Used Mainline Wire Reel.

Used Marcland Automatic Draw-off Complete with a Brass Paddle Valve. Comes with the Temperature Probe and wire.

Used Pump for a Micro1 or Micro2 RO Machine. Customer had it as a spare, but traded in his RO machine towards a larger one. 

Used Two Hand Tubing Tool for 5/16" Tubing (some rust). This tool has had the cutter blade removed, but a new one could be purchased and installed. 

White Plastic Candy Divider Tray with 12 Cells.