Products

10" Full Size Wes Fab Aluminum Filter Press with a Bronze Gear Pump.

Used 10" Wes Fab Short Stack Aluminum Filter Press with Gear Pump.

A 10' wide blower unit designed to go over an over-head door and provide a curtain of air to keep pests out of the room or building.

12" SS Collar only for a Roof Jack.

12" Stainless Stack Cover with a short piece of stack. 

12"x16" Vertical Vacuum Booster. Both ends are screwed on. Open to offers on this item.

14" Stainless Roof Jack, Leader Style, 10/12 Pitch, Side mount.

18" Stack Cover w/3' of 18" Galvanized Smoke Stack.

2' X 8' H2O HXL Demo Evaporator all Bricked w/H2O pans (used at our Open House with water). It has Cross Flow Pans, Sight Gauge, Window in the door...

2'x2' Leader revolution Syrup Pan, Right Draw w/Closed Box (New Factory Second).

2'x3' Stainless Suspended Hood. This hood has a drip channel on the inside, but no drain for it. 8" thimble on the top. 

2'x3' Welded Raised Flue Pan. Made by Leader. This pan does not have a float box and only has 1 fitting on the front bottom right corner. The pan i...

2'x5' Leader Welded Finishing Pan (New, factory second).

The outer shell on this tank has some holes in it, but the stainless liner inside is in very good shape.

21"x21"x18" Stainless Welded Pan with Stainless Cover and Handles. This is pan was made with a thicker stainless. It has a 1/2" draw-off fitting an...

22" Diameter Round Open Topped Draw-off Tank w/Valve and Wooden Stand. Stands 21" tall. 

3" Stainless Tri Clamp Valve

3'x10' Leader Evaporator with Inferno Arch, Drop Flue Pan, Revolution Syrup Pan and an Extra Syrup Pan. The spare syrup pan has been scorched. The ...

3'x20" Leader Welded Cross Flow Syrup Pan (New)

3'x3' Waterloo Welded Syrup Pan. There are a few hot spots/dings on the bottom of the pan. 

3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...

3,700 +/- Gallon Glass Lined Vacuum Tank w/New Paint on the Outside. Mounted on some Steel Beams. Roughly 109" high x 100" wide x 108" in total len...

30"x18" Leader Welded Cross Flow Syrup Pan (New). With open boxes and threaded drawoff fittings.

Used 325 Gallon Poly Pickup Tank. Made to fit in the back of a truck.

4'x12' Arch only with Airtight Front, two Blowers, Stainless Stack and Stack Cover. The back end of the arch needs to be re-tinned. 

4'x4' Welded Stainless Syrup Pan with Tri-Clamp Fittings (like new)

4'x6' Leader American (welded) Syrup Pan. This pan is in very good condition.

40"x20" Welded Cross Flow Syrup Pan, Excellent. 2" tri-clamp pan connections, and 1.5" tri-clamp drawoff fittings. 

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

42"x36" Lapierre/Waterloo Welded Cross Flow Syrup Pan.

Used 5 HP Airablo Vacuum Pump with Electric Motor and Oil Flood System.

5'x20" CDL SS Welded Cross Flow Syrup Pan. This pan has 2" tri-clamp fittings on the end.

550 Gallon Plastic Vertical Tank. It has a 2" drain fitting (female threads) down near the bottom. There are several holes drilled in the top of th...

7" Wes Fab Full Size Filter Press with Gear Pump. 

Used 80 GPM Flow Meter.

Airablo 1 1/2 HP Vacuum Pump w/Radiator Oil Cooler.