Products
-
3'x20" Leader Welded Cross Flow Syrup Pan (New)
$1,300.003'x20" Leader Welded Cross Flow Syrup Pan (New)
$1,300.00 -
3'x3' Mason Welded Syrup Pan (made as a Grimm copy)
$600.003'x3' Mason Welded Syrup Pan (made as a Grimm copy). Has been scorched. Has 3/4" drawoff size (no valves).
$600.00 -
3'x5' Welcome Flag w/Pure Maple Products Sold Here
$44.003'x5' Welcome Flag w/Pure Maple Products Sold Here.
$44.00 -
3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater
$10,300.003'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...
View full details$10,300.00 -
3'x8' Leader Evaporator w/Lead Free Soldered Pans (raised flue) SS Stack and Stack Cover.
$6,500.003'x8' Leader Evaporator w/Lead Free Soldered Pans (raised flue) SS Stack and Stack Cover. Made in the year 2000. Comes with covers for the pans t...
View full details$6,500.00 -
3,141 Gallon Lapierre Stainless Tank (6'Wx16'Lx61 1/2"H)
$7,050.003,141 Gallon Lapierre Stainless Tank (6'Wx16'Lx61 1/2"H).
$7,050.00 -
3-Way Threaded Manifold Top Only with 5/16" Tubing Barbs
$3.153-Way Threaded Manifold Top Only with 5/16" Tubing Barbs
$3.15 -
-
Sold out
$0.48Sold out -
3/16" Clear Seasonal Spout
$0.213/16" Clear Seasonal Spout. Made for a 5/16" tap hole, but the other end is for 3/16" tubing.
$0.21 -
-
3/16" Leader Dark Blue Max Flow 50 Tubing (800' roll)
$77.953/16" Leader Dark Blue Max Flow 50 Tubing (800' roll).
$77.95 -
3/16" Slide Fitting (only works on semi rigid tubing)
$0.433/16" Slide Fitting (only works on semi rigid tubing).
$0.43 -
-
-
$135.00 -
3/4" - 1 1/2" Mainline Tool
$375.003/4" - 1 1/2" Mainline Tool. This tool will work on mainline from as small as 3/4" up to 1 1/2". It has adapters to switch out for different sizes.
$375.00 -
-
-
-
-
-
3/4" Brass Male Thread to Sweat 90 Degrees - While Supply Lasts
$4.003/4" Brass Male Thread to Sweat 90 Degrees - While Supply Lasts
$4.00 -
-
3/4" Cap/Plug for Mainline Saddle (includes clamp, cap and seal)
$2.55If you remove a saddle and are looking for a way to plug the hole this item could be what you are looking for. The gasket will work for a 5/16" up ...
View full details$2.55 -
3/4" CDL Blue HD Mainline (500' roll)
$155.00A light blue high density pipe that is similar to working with black water pipe. Due to the light, translucent material, you are able to see the sa...
View full details$155.00 -
-
-
3/4" Drum Bung
$2.00A 3/4" bung for stainless drums. This bung would be a replacement for the smaller bung that can be used as a vent on some drums.
$2.00 -
3/4" Drum Gasket
$0.50A replacement gasket for a 3/4" bung. These black rubber gaskets will fit almost any 3/4" bung.
$0.50 -
-
-
3/4" Leader Mainline Tee with 5/16" Tubing Barbs
$4.803/4" Leader Mainline Tee with 5/16" Tubing Barbs
$4.80 -
-
3/4" Mainline Combo Elbow (3/4" insert x 3/4" male thread)
$2.253/4" Mainline Combo Elbow (3/4" insert x 3/4" male thread)
$2.25 -
3/4" Mainline Combo Tee (3/4" insert x 3/4" male thread x 3/4" insert)
$2.903/4" Mainline Combo Tee (3/4" insert x 3/4" male thread x 3/4" insert)
$2.90 -
-
3/4" Mainline End Elbow (Bottom Piece w/1/2" Threaded Hole to Fit Threaded Manifold Top)
$1.203/4" Mainline End Elbow (Bottom Piece w/1/2" Threaded Hole to Fit Threaded Manifold Top)
$1.20 -
-
-
3/4" Mainline Saddle w/SS Clamp for 5/16" Tubing
$2.55A saddle for 3/4" pipe that has a stainless clamp and is made for 5/16" tubing. Will work with a 5/16" hole up to 31/64" hole depending on which si...
View full details$2.55 -
3/4" Mainline Tee (Bottom w/ 1/2" Threaded Hole to Fit Threaded Manifold Top)
$1.503/4" Mainline Tee (Bottom w/ 1/2" Threaded Hole to Fit Threaded Manifold Top)
$1.50 -
-
-
-
3/4" Plastic Faucet for 5 Gallon Blue Plastic Drum
$3.503/4" Plastic Faucet for 5 Gallon Blue Plastic Drum.
$3.50 -
-
