Products

Grimm Round Drawoff Tank on Stand, SS Lead Free Soldered w/1" SS Valve and Hose (13"x34").

Grimm Stainless Soldered Trough for Candy Machine. This is an old soldered trough. No markings or tags on it. 

The Z arm hot sap regulator. This is used on a Grimm evaporator or the Leader Patriots and is designed for the newer style float (#FG3). This Z arm...

This saddle is for 1" mainline, and 5/16" tubing. Requires a 15/32" hole in the pipe to seal properly. Once the elbow is inserted all the way, the ...

H2O 12 Gallon Round Draw-off Tank with Cover (15"x20"). Has a 3/4" female threaded fitting on it. 

H2O 19/64" Blue Spout for 5/16" tubing.

H2O 2 -1 HP Pumps 18"x36" Vertical Electric Releaser with Manifold.

H2O 2" Modulating Automatic Draw-off with Barometric Compensation, Motorized Valve, Controller and Probe. Comes with the down spout. Has a 2" tri-c...

H2O 25 Gallon Round Draw-off Tank (with cover) 21"x26". It has a 3/4" threaded coupling down at the bottom. 

H2O 3" Electric Vortex Deluxe Moisture Trap.

This saddle is for 3/4" mainline, and 5/16" tubing. Requires a 15/32" hole in the pipe to seal properly. Once the elbow is inserted all the way, th...

H2O 36" Precut 5/16" Dropline, Blue. These come nice and straight. However, if we ship them they may get bent to fit in the box and have a small cu...

H2O 5/16" Green Flex Tubing (500' roll). This is a 15 year tubing that is flexible and easy to work with. A great tubing for drop lines, but can be...

H2O Dual Compartment Insulated Draw-off Tank on Wheels. Comes with two 20 Gallon Compartments that have an overflow in them, and sliding covers on ...

H2O Econox 600 RO Machine. The Econox line is designed for producersowning between 1,000 to 15,000 taps- Compact, takes less than 5 sqft of floor ...

H2O Horizontal Electric Vacuum Releaser with Manifold. With a 1/2 hp Submersible pump. Good for pumping up to 10' in elevation and good for roughly...

H2O Releaser Electric Float Switch for a Vertical Releaser. 

H2O RO Clean 20L Liquid RO Soap It is used to clean organic matter stuck to the membrane surface. After a soap wash, it is necessary to rinse. Impo...

H2O Vertical Electric Releaser with 1 HP Pump, 12"x36" (no manifold). 15 gpm pump capable of pumping up to 30' in elevation. Sap inlet height of 21...

H2O Vertical Electric Releaser with 1/2 HP Submersible Pump and a Manifold (12"x36"). The 1/2 HP pump will pump up in elevation 10'. The back manif...

H2O Vertical Electric Releaser with a 1 HP Pump and a Manifold (12"x36").

Regular/daily soap wash, for during the sugaring season This is the soap referenced in the MicroRO and MiniMicroRO instruction manuals.  Dilution p...

H2O-Leader 7/16" Stubby Spout to be used with an adapter. Either item # LACSPADAP, LASPADAP, LACVADAP, or LACCVADAP will work with this stubby spou...

Half Pint Arch Extension to make it a 48" Arch. This extension bolts on to the back of a 1/2 pint arch and enables someone to put a 2'x4' pan on th...

Handle for 1 1/4" or 1 1/2" Plastic Valve

Hanna Digital Thermometer, 12" stem

Hanna Digital Thermometer, 5" stem

Measures the light transmittance of syrup to determine the grade.

Hanna PH Meter

This hardwood handle fits into the end of either the large or small scoop or skimmer. This handle measures 16" long, and you do not have to worry a...

A rubber candy mold in the shape of a large heart. This candy mold has 15 cavities and measures 2 1/4" wide and 2 1/4" tall. Great for Valentines D...

Heart Hard Candy Mold

A heart shaped rubber mold with 20 cavities. These hearts are smaller in size and measure approximately 1" wide x 1" tall. Click for care instructions

Works with a Long Style Hydrometer Cup. Will not work in a short cup. Brix scale 0°-35° for checking high concentrate State of Vermont inspected H...

Horizontal Vacuum Releaser (up to 6,000 Taps) These are the most reliable sap extractor units on the market. When connected to a vacuum pump, these...

A replacement float for a Grimm or Leader hot sap float. This float measures 8.5" x 4.5". They now are making them with a crank on the top which al...

Third-generation syrup makers Alison and Steven Anderson walk you through how to collect sap using a tree-friendly tubing system and then boil, pac...

This book tells the true story of Luke and Layla as they learn from Grampy all about tapping maple trees and making maple syrup! A Sugar Slang glos...

This is a true story of one boy's experience during the maple sugaring season in NH and his anticipation of spring and his birthday. 24 pages.

Ice Skate Plastic Sucker Mold

Inlet Fitting (1 1/4") for Diaphragm Vacuum Pump (for a Guzzler 500 base). 

Insulating Arch Board 1" thick by 12" wide and 3' long. The arch board is used to line the arch before the firebrick is placed in the arch. It is s...

Used in oil fired arches, or on the doors for an airtight front wood arch. This blanket can also be cut to certain dimensions and used in between t...

Originally written by Patricia B. Mitchell for museums and their patrons, this old fashioned cookbook doesn't just provide recipes from by-gone era...

Kwik 2 HP Electric Rotary Vane Vacuum Pump. Single Phase 13 cfm @ 20" InHg, max 29" InHg.

Kwik 3 HP Electric Rotary Vane Vacuum Pump. Single Phase 18 cfm @ 20" InHg, max 29" InHg.

Kwik 5 HP Electric Rotary Vane Vacuum Pump. Single Phase 28 cfm @ 20" InHg, max 29" InHg.