Products

Tubing Adapter Separator. For separating stubby spouts from adapters. It also has a spot that works as a hammer, and the piece on the top is for re...

Tubing Clippers

Tubing De-nuder Pliers with Cutter and Spout Remover/Hammer for 5/16" Tubing (4 function)

Tubing Reel w/Hook

Serrated Tubing Stripper Blade.

Tubing Stripper for 5/16" Tubing Fittings. This tool pinches the tubing around the barb so that the tubing can be pulled off the barb without damag...

Tubing Stripper Pliers

Tubing Tension Hooks for 5/16" and 3/16" Tubing.

Tulip Plastic Sucker Mold

Two Hand 5/16" Tube Fitting Machine

Two Hand 5/16" Tubing Tool Auto

Universal SS Leader Vacuum Releaser Support for a 4' Tank.

US Grade A Amber Rich Taste Grade Label (500/roll)

US Grade A Dark Robust Taste Grade Label (500/roll)

US Grade A Golden Delicate Taste Grade Label (500/roll)

US Grade A Very Dark Strong Taste Grade Label (500/roll)

Used 1 1/2 HP Airablo Oil Cooled Vacuum Pump with Oil Reclaimer.

Used 1.5" Stainless Triclamp Ball Valve.

Used 1/3 HP Electric Motor for Filter Press.

Used 125 Gallon Horizontal Plastic Tank w/Valve

14" Roof Jack, Sidemount w/Collar, 5/12 Pitch

Used 18" Stainless Steam Stack. 3' section.

Used 2" Leader Vacuum Regulator with Weight.

Used 30 Gallon Stainless Syrup Drum.

Used 35 Gallon Plastic Horizontal Tank.

Used 425 Gallon Plastic Pickup Tank. There is a hole in the cover that has been taped over. Comes with a 2" valve on the tank. 

Used 5/16" Hole Cutter Drill

Used 7 1/2" Leader Plastic Filter Press w/5 Frames and an Air Diaphragm Pump.

Used 8" Galvanized Smoke Stack Tee

These used aluminum buckets hold roughly 2 - 2.5 gallons of sap. Many of these buckets have smaller holes for hanging on the trees and work better ...

Used BHR Hobby Double Vacuum Releaser for up to 1,000 taps.

Used BHR Vertical Double Vacuum Releaser. Good for up to 2,500 taps. 

Used Cast Soule or Warner Spout.

Used CDL 9" Vacuum Filter Press. This vacuum press does not come with any filters. 

D&G 600 GPH RO Machine with a New 8" Membrane. This machine has a 1hp feed pump and a 5hp high pressure pump.

Used Electric Single Diaphragm Vacuum Pump with 1.25" inlet and outlet. No releaser needed.

Used Leader Tubing Reel with Hook. This tubing reel is still in excellent shape. 

Used Mainline Wire Reel.

Used Marcland Automatic Draw-off Complete with a Brass Paddle Valve. Comes with the Temperature Probe and wire.

Used Pump for a Micro1 or Micro2 RO Machine. Customer had it as a spare, but traded in his RO machine towards a larger one. 

Used Two Hand Tubing Tool for 5/16" Tubing (some rust). This tool has had the cutter blade removed, but a new one could be purchased and installed. 

A rubber mold with 20 cavities. Each cavity holds approximately 1/3 of an ounce of candy. This is a variety mold where you will most likely get 5 o...

This variety candy mold has 160 cavities each one holding 1/3 of an ounce of candy. There are over 10 different shapes on each mat so it really doe...

Variety Plastic Hard Candy Mold

A replacement cap for the vent on the current blue plastic 5 gallon containers. Measures about 1" in diameter.

A light weight insulation used for insulating a wood fired evaporator between the baffolds. Using vermiculite will do a better job insulating than ...

This cookbook was put together by the volunteers from Vermont who help with the Vermont Maple Festival. Special features include front and back cov...

Vermont Maple baseball hat available in green or blue.