Products

This pail of cement is premixed and ready to use. On average customers can cement between 100-110 bricks out of a single 50lb pail.

A regulator arm for a Leader cold sap float box.

Repair Kit for 1 Hand Tubing Fitting Tool

Replacement Blade for LOAC Tubing Tool.

RO Bucket Electric Heated Canner/Filter Unit (New). This unit has a pump, filter and heating element. With the valve it also functions as a canner....

RO Bucket Kit (RB15). This is a new unit that comes with 3 membranes, and several prefilters. 

RO Cartridge Filter Spacer. Used to hook two cartridge filters end to end to double the length. Common for the 40" long filter housings.

Roll of 3/4"x100' Black Mainline (never used)

A Filtering unit that uses vacuum to help draw the syrup through a filter. You need a shop-vac or a vacuum pump to create the vacuum, and that help...

Round 9" Vacuum Syrup Filter Press. Good for producers making small amounts of syrup each day. There is not much surface area on one of these filte...

Rubber Gasket/Seal for Blue Plastic 5 Gal Container

Rubber Gloves for Hot Syrup or Water, 12" from finger tip to end of the cuff. These gloves work great for cleaning a filter press or for cleaning e...

A rubber plunger for the inside of the Solenoid valves. This little rubber piece is what forms the seal inside the solenoid valve.

Each mold has 10 cavities of Santa Claus. This is the whole Santa not just a head. Each Santa measures 1 7/8" wide and is 3" tall. Each cavity hold...

Sap Level Gauge Gasket.

A replacement 1/2" diameter glass tube that is 12" long for a standard sight gauge.

0°-18° Brix Sap Refractometer.

Sap Sak. Holds 2.5+/- Gallons.

Sap Sak Holder

This brush has a long handle and is perfect for cleaning down in between the flues on a flue pan. Whether it is a raised flue or a drop flue, this ...

A triangled shaped brush designed to get down in between the flues on the back pan. Works with raised or drop flues. 10" from the handle to the bot...

SB 1 1/2" Aluminum Yoke for Hot Sap Regulator

Screw for CDL Multi Fittings

2" in diameter; 8" tall for use with the Short Syrup Hydrometer

Brix scale. 1°-12°Brix calibrated at 38°F State of Vermont inspected Hydrometers are fragile, glass instruments. They must be handled very cautious...

Baume & Brix scale 25°-40° Baume, 45°-75° Brix. Red lines at hot and cold test. 9 3/8" long - can be used with any of our hydrometer cups, but ...

Sight Level for Mainline

A long handled nylon brush designed to clean the glass sight tubes on evaporators. From the tip of the brush to the end of the handle it measures 24".

Single Glass Bottle Labeler (table top model). Sold as Is.

Fits 3/4", 1", and 1 1/4" mainline pipe; requires 31/64" hole

Single Manifold Saddle w/Elbow - While Supply Lasts

This regulator packing is a soft material almost like a foam. It is 3/16" thick and 2" in diameter. It is used on many of the old Small Brothers ev...

This regulator packing is a soft material almost like a foam. It is 3/16" thick and 1 3/4" in diameter. It is used on many of the old Small Brother...

This is the cold sap regulator for many of the old Small Brothers evaporators where the feed was coming in from the bottom. The bottom of this item...

Small Brothers Flue Pan Regulator Arm

A stainless welded float that is 6 1/8" wide and 12" long. This float is for the flue pan on a Small Brothers evaporator. It has a hole on each sid...