B2B Catalog Collection

4 1/2" Diameter Dry Vacuum Gauge

9 Gauge Galvanized Wire 800' Roll

1" Stainless Tee w/Female Thread

Connecticut Maple baseball hat, available in green or blue.

3/4" x 500' roll of Black Plastic Mainline.

This saddle is for 1" mainline, and 5/16" tubing. Requires a 15/32" hole in the pipe to seal properly. Once the elbow is inserted all the way, the ...

A 19/64" tapping bit that is a little longer than the other ones we sell. These bits are designed for a precision tapper, but also work in a standa...

A Christmas star, or a star for any other time of year. With this mold you can make up to 20 stars at a time. A nice bite-size piece of candy. Each...

A leaf shaped grade sticker in the color reflecting the grade with VT grade information printed on it. 1 1/8" 

This simple VT grade label has all the pertinent information printed on a 7/8" circle sticker. The words are on a leaf backdrop, which reflects the...

M-125 Female Camlock 1 1/2"

1 1/2" Threaded PVC Valve

The large skimmer is roughly 5.5" wide, and used for skimming things out of the evaporator. Many producers purchase a hardwood handle to put on the...

A 3/4" bung for stainless drums. This bung would be a replacement for the smaller bung that can be used as a vent on some drums.

Hale Matton has been collecting spouts and other sugaring paraphernalia for almost 50 years. This book includes photographs of and information abou...

1 1/2" O-Ring for Vacuum Releaser.

Regular/daily soap wash, for during the sugaring season Dilution proportions generally require reaching a certain PH level, rather than a ratio num...

2 3/8" Soft Rubber Leader Regulator Packing. Roughly 1/8" thick.

Tubing Adapter Separator. For separating stubby spouts from adapters. It also has a spot that works as a hammer, and the piece on the top is for re...

Sunflower Oil that is safe for those that are certified organic. It may not be as effective as some of the other defoamers, but if you are certifie...

You must be a member of the VT Sugar Makers Association to buy these jugs! This is an almond Sugarhill plastic jug, labeled for the Vermont Sugar M...

This is an almond Sugarhill plastic jug, printed for Connecticut, with a gold on gold wrapped label. A sugar house is boldly outline against a more...

M-120 Male Adapter 3/4"

Leader 1" Mainline Fitting

M-122 Male Adapter 2"

3/4" Mainline Insert Elbow

1 1/4" Mainline Tension Grip

6" Elbow for Smoke Stack

6" Stainless Smoke Stack 4' in length.

1 1/2" Short Plastic Nipple

10" heavy duty wire ties for 2" pipe or smaller. 500/roll Recommended Tools: Tool for twisting ties                                             Aut...

3/4" Stainless Tee w/Female Thread

1"x1/2" Stainless Reducing Bushing

A drum over-flow control valve for those producers that fill drums. The unit fits down into the drum and has an overflow hose with a hook on the en...

Vermont Maple baseball hat, available in green or blue.

Black Plastic Cap 38 mm for Decanter Bottle, sold individually.

This is an almond D&G plastic jug. The front has a oval sugar house scene, bordered with "Pure VERMONT maple syrup" and the jug capacity infor...

Lapierre 5/16" End Line Tee (left side plugged)

A small pumpkin with a happy jack-o-lantern on each one. There are 16 cavities on this mold. Each small pumpkin measures 1 1/4" wide x 1 1/4" tall....

3/4" Mainline Insert Tee

1 1/4"x1 1/4"x3/4" Stainless Reducing Y

1 1/4" Stainless Ball Valve

Bernard Vacuum Releaser Flap

Extra Tubing Tool Knife Blade.

New York Maple baseball hat available in green or blue.

4" U-Cup Gasket for RO Membrane.

Experience the natural sweetness and rich flavor of our 1 lb Bag of Pure Maple Sugar Sifted Granules. Carefully crafted from 100% pure maple syrup,...

This rubber mold contains 6 cavities of rabbits. These large rabbits are standing on their hind legs. They measure approximately 2" wide x 4" tall....