B2B Catalog Collection

1" Mainline Insert Tee

2" Short Plastic Nipple

Stainless Insulation Clip

2" Triclamp Solid End Cap

1/2" Stainless Coupling w/Female Thread .

H2O 19/64" Blue Spout for 5/16" tubing.

Formerly know as Grade B maple syrup, Grade A Dark Color, Robust Taste maple syrup is produced as the days become warmer and longer in sugaring sea...

With 8 cavities, this rubber mold shows the shape of the state of NH and has the letters NH on each candy. The cavity measures 1 3/4" wide across t...

A thick white regulator packing that is a spongy rubber material. It is about a 1/4" thick and is 3 3/8" in diameter. Can be used in the hot or col...

This simple VT grade label has all the pertinent information printed on a 7/8" circle sticker. The words are on a leaf backdrop, which reflects the...

1" Mainline Tee (Bottom Piece w/1/2" Threaded Hole to Fit Threaded Mainifold Top)

1/2" Leader Mainline Y

3" Dial 0 - 50 Degrees 9" Stem Thermometer

4 1/2" Diameter Dry Vacuum Gauge

9 Gauge Galvanized Wire 800' Roll

1" Stainless Tee w/Female Thread

Connecticut Maple baseball hat, available in green or blue.

3/4" x 500' roll of Black Plastic Mainline.

This saddle is for 1" mainline, and 5/16" tubing. Requires a 15/32" hole in the pipe to seal properly. Once the elbow is inserted all the way, the ...

A 19/64" tapping bit that is a little longer than the other ones we sell. These bits are designed for a precision tapper, but also work in a standa...

A Christmas star, or a star for any other time of year. With this mold you can make up to 20 stars at a time. A nice bite-size piece of candy. Each...

A leaf shaped grade sticker in the color reflecting the grade with VT grade information printed on it. 1 1/8" 

M-125 Female Camlock 1 1/2"

1 1/2" Threaded PVC Valve

The large skimmer is roughly 5.5" wide, and used for skimming things out of the evaporator. Many producers purchase a hardwood handle to put on the...

A 3/4" bung for stainless drums. This bung would be a replacement for the smaller bung that can be used as a vent on some drums.

Hale Matton has been collecting spouts and other sugaring paraphernalia for almost 50 years. This book includes photographs of and information abou...

Vermont Maple baseball hat, available in green or blue.

1 1/2" O-Ring for Vacuum Releaser.

Regular/daily soap wash, for during the sugaring season Dilution proportions generally require reaching a certain PH level, rather than a ratio num...

2 3/8" Soft Rubber Leader Regulator Packing. Roughly 1/8" thick.

Tubing Adapter Separator. For separating stubby spouts from adapters. It also has a spot that works as a hammer, and the piece on the top is for re...

Sunflower Oil that is safe for those that are certified organic. It may not be as effective as some of the other defoamers, but if you are certifie...

You must be a member of the VT Sugar Makers Association to buy these jugs! This is an almond Sugarhill plastic jug, labeled for the Vermont Sugar M...

This is an almond Sugarhill plastic jug, printed for Connecticut, with a gold on gold wrapped label. A sugar house is boldly outline against a more...

M-120 Male Adapter 3/4"