B2B Catalog Collection

2'x6' Lapierre Vision Evaporator with Classic PansLapierre's VISION line is designed for hobby or smaller sugarmakers or those without electricity....

Leader 2x4 Vermonter Pan (raised flue)

1 1/4" Barbed x 1 1/4" MPT Plastic Check Valve

Half Pint Arch Extension to make it a 48" Arch. This extension bolts on to the back of a 1/2 pint arch and enables someone to put a 2'x4' pan on th...

1.5"x1.5" Insert 3/4" FPT

1 1/2" x 1 1/4" x1 1/4" Reducing Insert Tee

1" Barbed Plastic Cross

2" Barbed x 2" FPT Plastic Elbow

This CDL cream machine with a 3/4 hp stainless steel pump running on 110 V is capable of making up to 1.5 gallons of cream at a time. This cream ma...

519 Gallon Lapierre Stainless Tank (4'Wx8'Lx33 1/4"H) Full steel frame; 1 1/2" MPT outlet

Blue Plastic Vent Cap for 8" Tank Cover.

18"x36" H2O Vertical Electric Vacuum Releaser w/Manifold and two 1/2 HP Pumps. The back manifold has 6 - 1 1/4" holes in it for hooking up sap line...

Kwik 3 HP Electric Rotary Vane Vacuum Pump. Single Phase 18 cfm @ 20" InHg, max 29" InHg.

1 1/2" Black Plastic Mainline (500' Roll). The ID is 1 1/2". This pipe is rated for 125 psi.

Strap for Smartrek Sensor.

H2O Vertical Electric Releaser with a 1 HP Pump and a Manifold (12"x36").

H2O 12 Gallon Round Draw-off Tank with Cover (15"x20"). Has a 3/4" female threaded fitting on it. 

D&G/Airablo 8 cfm Gas Powered Oil Cooled Vacuum Pump (manual start) with a moisture trap. 

3/4" Barb to 1 1/2" Tri-clamp Adapter

1 1/4" Barb to 1 1/2" Tri-clamp Adapter.

CDL 2hp Oil Cooled Vacuum Pump (single phase).  For up to 1,700 taps. 

1/2" Air Diaphragm Pump with Base, Valves, and Regulator for a filter press. 

Wheel Support for H2O 25 Gallon Round Drawoff Tank. With 4 wheels.

76 Gallon Lapierre Tank  This tank has a 1 1/2" opening with MPT on the bottom. The tank measures: 18" wide x 4" long x 26" high.

Gas Line Hose and Regulator for Gas 16"x34" Finisher.

15" Filter press papers for a D&G or Leader 15" filter press. There are 250 papers in a case.

This is a 2" tri-clamp fitting that will get you to 1.5" female pipe threads. Clamp and gasket sold seperate.

H2O TS-Pro Modulating Auto-Draw w/ 1" Threaded Valve. Runs on 110v. 

7" Filter Press Stop Plate for blocking off part of a filter press. 

O Ring Kit for BHR Hobby Vertical Double Releaser. Includes 12 total o-rings. 

Clip for Lapierre Super Saddle

D&G Can Sealer Kit (includes a case of 200 cans, sealer, & 25 shippers)

Lapierre Additional Valve Only for Autoflo. This would be if you wanted a second (or more) valve for your main Lapierre Autoflo as it plugs into th...

Slide Gate for Syrup Pan. Designed to hang over a partition in a pan, and block off a channel.  Not sure what pan it was designed for, or would wor...

Gasket for 2" Bulkhead Fitting

SKF Spider for Lovejoy Coupling

1" Feed Pipe Elbow for Cold Sap Inlet

Right Fire Door for Leader 2' Arch (with 2 doors). Sold as Is

Orange Metal Backer for State Signs. This backer, really makes the maple leaf pop. 

Male Garden Hose x 1/2" Male Pipe Thread.

1/8" Plastic Compression Fitting. The end with threads and the nut is 1/4" threads. 

White Metal Backer for Home Sweet Home Sign

White Metal Cover for 1 LB Printed Cream Jars.  These covers do not fit the plain glass cream jars, only the printed ones. 

Drip Tray for a Wes Fab Short Stack 7" Filter Press. A stainless pan that measures 12"x10"x2 1/2".

Hand Filter Press Pin Set

Belt for Full Size Wes Fab Filter Press.

Gas Line Hose for Gas Finisher.

Tanaka Pump Hose Coupling