B2B Catalog Collection

Atlanti Fluid Vacuum Pump Oil (5 gallon pail).

Base Stack for a 40" Wide Arch Stainless .

2x6 Set of WSE Raised Flue Pans w/Fitting Kit. While we try to keep this item in stock, you should call for availability.

Leader WSE 2’ x 6’ Evaporator The Leader WSE is tig welded of 20 gauge bright annealed stainless steel solid stainless steel connections, and clamp...

Lapierre (small) Horizontal Single Releaser (for up to 1500 taps). It has 7 - 1" holes drilled in the back manifold.

2'x6' Lapierre Vision Evaporator with Classic PansLapierre's VISION line is designed for hobby or smaller sugarmakers or those without electricity....

Leader 2x4 Vermonter Pan (raised flue)

1548 Gallon CDL Stainless Storage Tank (4'Wx16'Lx4'H)

1 1/2" Mainline Tee (1 1/2" Insert x 1 1/2" Insert x 1 1/2" FPT)

1 1/4" Barbed x 1 1/4" MPT Plastic Check Valve

1 1/2" Threaded Adapter to 1 1/4" Barbed

Half Pint Arch Extension to make it a 48" Arch. This extension bolts on to the back of a 1/2 pint arch and enables someone to put a 2'x4' pan on th...

1.5"x1.5" Insert 3/4" FPT

1 1/2" x 1 1/4" x1 1/4" Reducing Insert Tee

1" Barbed Plastic Cross

2" Barbed x 2" FPT Plastic Elbow

519 Gallon Lapierre Stainless Tank (4'Wx8'Lx33 1/4"H) Full steel frame; 1 1/2" MPT outlet

Blue Plastic Vent Cap for 8" Tank Cover.

18"x36" H2O Vertical Electric Vacuum Releaser w/Manifold and two 1/2 HP Pumps. The back manifold has 6 - 1 1/4" holes in it for hooking up sap line...

Kwik 3 HP Electric Rotary Vane Vacuum Pump. Single Phase 18 cfm @ 20" InHg, max 29" InHg.

Strap for Smartrek Sensor.

H2O Vertical Electric Releaser with a 1 HP Pump and a Manifold (12"x36").

H2O 12 Gallon Round Draw-off Tank with Cover (15"x20"). Has a 3/4" female threaded fitting on it. 

D&G/Airablo 8 cfm Gas Powered Oil Cooled Vacuum Pump (manual start) with a moisture trap. 

1 1/4" Barb to 1 1/2" Tri-clamp Adapter.

CDL 2hp Oil Cooled Vacuum Pump (single phase).  For up to 1,700 taps. 

1/2" Air Diaphragm Pump with Base, Valves, and Regulator for a filter press. 

Wheel Support for H2O 25 Gallon Round Drawoff Tank. With 4 wheels.

76 Gallon Lapierre Tank  This tank has a 1 1/2" opening with MPT on the bottom. The tank measures: 18" wide x 4" long x 26" high.

Gas Line Hose and Regulator for Gas 16"x34" Finisher.

15" Filter press papers for a D&G or Leader 15" filter press. There are 250 papers in a case.

This is a 2" tri-clamp fitting that will get you to 1.5" female pipe threads. Clamp and gasket sold seperate.

CDL Electric Moisture Trap Sensor.

Used Smokey Lake Auto-Draw with Stack Temperature. Comes with a 3/4" Motorized Valve. 

New 18"x48" CDL Stainless Syrup Pan

10" Stainless Roof Jack Collar.

H2O TS-Pro Modulating Auto-Draw w/ 1" Threaded Valve. Runs on 110v. 

7" Filter Press Stop Plate for blocking off part of a filter press. 

O Ring Kit for BHR Hobby Vertical Double Releaser. Includes 12 total o-rings. 

Clip for Lapierre Super Saddle

Lapierre Additional Valve Only for Autoflo. This would be if you wanted a second (or more) valve for your main Lapierre Autoflo as it plugs into th...

Slide Gate for Syrup Pan. Designed to hang over a partition in a pan, and block off a channel.  Not sure what pan it was designed for, or would wor...

Gasket for 2" Bulkhead Fitting

SKF Spider for Lovejoy Coupling

1" Feed Pipe Elbow for Cold Sap Inlet

Right Fire Door for Leader 2' Arch (with 2 doors). Sold as Is

Male Garden Hose x 1/2" Male Pipe Thread.

1/8" Plastic Compression Fitting. The end with threads and the nut is 1/4" threads.