B2B Catalog Collection

Pump Priming Plug for a Tanaka Pump

Black Gas Cap for Newer Tanaka Tapper. 

1 1/2" - 2" Y Strainer Screen for a plastic inlet filter.

Sap Level Gauge Bracket - While Supply Lasts. Used to hold the top of a sight gauge on a Leader drop flue pan. 

30" Arch Pan Gasket Holder. Designed to go into the insulation that goes between the front and the back pan to make it a little more rigid so it is...

A small SS Pot with a cover that has a 1/2" female threaded fitting on the bottom. Designed to mix filter aid into a little syrup to charge a filte...

2"x1/2" Stainless Threaded Reducing Bushing

Oil Seal for 8CFM Airablo Pump Sold individually, but each pump takes 2 to rebuild. 

Bearings for 8cfm Pump head. Sold individually, but it takes 3 to rebuild a pump. 

8"x40" Membrane Storage Cannister.

3/8" Brass Threaded Plug

1 1/2" x 1/2" Stainless Thread Reducing Bushing.

DISCONTINUED-Valve Tip for Hands Free Bottler. 1/2" Male threads and then the tip is roughly 3/8". 

2'x2' Lapierre 3 Compartment Syrup Pan for a Vision Evaporator.

2" Mainline Tension Grip.

2" Mainline Insert Tee.

28mm Gold Tamper Evident Cap for Acero Glass

Gold Caps for Nu Can Barrel Glass (24mm). These covers fit items #GLBAR125 and GLBAR250. 

D&G Semi-Rigid Translucent Blue 85X 5/16" Tubing, 500' Roll. 

Blue Plastic  Vent Cap for 16" Tank Cover.

Apron with Maple Syrup Containers for a print with 2 pockets. Only 1 available with this print.  This charming apron features a maple syrup print a...

2"x3/4" Stainless Reducing Bushing

NH Magnet with Maple Leaf Cutout. Roughly 3.5" tall x 2" wide. 

D&G Clear 5/16" Spout 110 degree for 5/16" Tubing. 

D&G green spout that is designed for a 1/4" tap hole. The other end fits into 5/16" tubing.  These are a seasonal spout, designed to be replace...

9" Galvanized Smoke Stack (3' lengths)

8" Galvanized Smoke Stack (3' lengths).

1 1/2" x 12" Sight Glass Tube

1,335 Gallon Elliptical Tank. 66" wide x 126" long and 55" high.  It has a 16" cover on the top and a 2" bulkhead fitting on the end with female th...

1,635 Gallon Elliptical Tank. 71" wide x 142" long and 58" high.  It has a 16" cover on the top and a 2" bulkhead fitting on the end with female th...

Used H2O Vertical Electric Release w/ 1/2 HP Submersible Pump.

Grimm 35 Gallon SS Square Filter Tank w/Rack, Valve and Wooden Stand (lead free solder)

Used Waterloo 35 Gallon SS Square Filter Tank w/Rack, Valve and a Metal Stand. This is a Soldered filter tank that is sold as is. 

Used 6"x25" Steel Evaporator Grate

Used 2'x4' Leader WSE Evaporator with Galvanised Arch, Stack, Bricks, WSE Drop Flue Pans and Storage Crates. The entire evaporator is on a frame wi...

Used 550 Gallon Vertical Plastic Tank.

Used CDL Horizontal Small Vacuum Extractor (for up to 4000 taps)

3 HP CDL Oil Cooled Vacuum Pump (used one season).

7" D&G 3 Frame Aluminum Filter Press with a Brass Gear Pump

The MicRO EVO 1 delivers 100 gph, removing up to 75% of water in a single pass. With its stainless steel pressure vessel and end caps, paired with ...

The MicRO EVO 2 delivers 200 gph, removing up to 75% of water in a single pass. With its stainless steel pressure vessel and end caps, paired with ...

10" H2O 9 Frame Press with No Pump.

12" Stainless Single Wall Lapierre Smoke Stack, 4' long. 

10" D&G 10 Frame Filter Press w/Electric Diaphragm Pump and Stand.

CDL 9" Vacuum Press Cover Assembly

Prefilter Screen for Mini Micro with 1/2" Threads. 

D&G 3/4" Dark Blue Mainline 500' Roll.

D&G 1" Dark Blue Mainline 500' Roll.