B2B Catalog Collection

Used 3 HP SIHI Water Cooled Vacuum Pump.  Single stage that will pull 25". Good for a bush with 1,200 taps or less. 

Used Lapierre Bottling Unit w/Four Filler Nozzles and Shelves.

6"x24" Horizontal Vacuum Booster Tank, New.

2'x4' Welded CDL Flat Syrup Pan, (dented on top edge) New.

Deer Run Model 500 RO Machine with a Gas Motor (needs new 8" membrane and a low pressure oil switch)

Used 7" CDL Full Stack Aluminum Filter press w/Electric Pump.

Used 12 Gallon Lapierre Water Jacketed Canner w/Stand

1 1/4" Stainless Mainline Insert Plug with Ring

1 1/2" Stainless Mainline Insert Plug with Ring

3" Stainless Ball Valve. 

1" Stainless Tri-Clamp Fitting with Barbs on Both Ends

3 HP Tuthill Water Cooled Vacuum Pump w/Electric Motor

Used Airablo Electric Vacuum Releaser with 1/2 HP  Pump (6 gpm).

2" Stainless Threaded Plug.

Outlet Fitting (1 1/4" FPT) for Diaphragm Vacuum Pump for a Guzzler 500 Base. 

2'x4' Set of Leader WSE Pans, (drop Flue) Pans were made in 2008 but never used.

Pressure Switch for a Micro RO

Used 16" Stainless Steam Stack. This is a little heavier than the standard steam stack. 

4'x4' Welded Patriot Syrup Pan (leaks around the drawoff fitting) SOLD AS IS

D&G Horizontal Releaser w/a 1/2 HP Submersible Pump. Gone through and tested by D&G. 

2" Butterfly Valve Repair Kit  - for a Leader 2" Butterfly valve. 

Used Dandurand Cream Machine w/Stainless Soldered Pan, Lead Free. 

Smartrek-H2O Ultrasonic Tank Level Sensor

H2O 2 -1 HP Pumps 18"x36" Vertical Electric Releaser with Manifold.

This rubber candy mold mat contains 80 cavities of a little man. Each cavity measures 1 1/8" wide x 3" tall. Pairs nicely with the little maid (CML...

This rubber candy mold contains 80 cavities of a little maid. Each cavity measures 1 1/4" wide x 2 3/4" tall. Pairs nicely with the little man (CML...

SB 1 1/2" Aluminum Yoke for Hot Sap Regulator

All new containers come with caps. A white cover that has holes in the top so it can be used as a shaker that fits the older 1 pound honey jars wit...

2" Mainline Combo Tee (2" insert x 2" male thread x 2" insert)

1 1/2" Mainline Combo Tee (1 1/2" insert x 1 1/2" male thread x 1 1/2" insert)

1 1/2"x1 1/2"x1 1/4" Reducing Insert Tee

1 1/2" Mainline Tee (Bottom Piece w/1/2" Threaded Hole to Fit Threaded Manifold Top)

1 1/4"x1"x3/4" Stainless Reducing Y.  These are discontinued by the manufacturer. We may have as many as 3 left. 

1 1/4" x 1 1/4" x 1" Mainline Reducing Tee

1" x 1 1/4" x 1/2" Mainline Reducing Tee

2" Dial Thermometer for Atlantic Fluid Vacuum Pump 2 1/2" stem (0-220 degrees)

1/2 " Brass Check Valve w/Female Thread

2" x1/4" Stainless Reducing Bushing

This is a new 4'x4' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

This is a new 3'x3' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

1/2" Brass Male Thread to Sweat 90 Degrees - While Supply Lasts

This is the new international grade disc for a Lovibond grade set. This has the new grades: Golden, Amber, and Dark Robust. It must be used with a ...

The Leader grate looks like a double V. It measures 48" long and is 4.5" wide. The ends are about 1.5" thick.

The Leader grate looks like a double V. It measures 36" long and is 4.5" wide. The ends are about 1.5" thick.

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 48" long and 4"...

325 Gallon Pickup Tank. Molded to fit around wheel wells of full size, American-made pickups. Low profile for better rear vision. Fill opening offs...

1100 Gallon Vertical Tank. This tank has a 2" fitting with female threads on the end of it. The tank measures: 87" wide x 87" long x 53" high and h...

Base Stack for a 72" Wide Arch Stainless