B2B Catalog Collection

Lapierre 12 Gallon Water Jacketed Canning Unit with Stand.

CDL Vacuum Releaser w/ 1 1/2 HP Submersible Pump.

1 1/4" Brass Male Thread to Sweat to 90 Degrees - While Supply Lasts

3,141 Gallon Lapierre Stainless Tank (6'Wx16'Lx61 1/2"H). Full steel frame; 2" MPT outlet

1025 Gallon Horizontal Tank. This tank has a 2" fitting with female threads on the end of it. The tank measures: 49" wide x 139" long x 54" high an...

20" Stainless Smoke Stack

1/2" Outlet Fitting for Hand Pump w/Female Thread.

2'x4' Stainless Hood.

1/2 Pint Leader Oil Fired Arch w/Oil Burner and Insulation. Comes with a Carlin Oil Burner, and the arch is lined with ceramic blanket. Takes a 24"...

9 HP Airablo Gas Vacuum Pump w/Flood Oil System and Oil Cooler Kit (30 cfm)

3 HP Airablo Vacuum Pump w/Flood Oil System and Oil Cooler Kit (30 cfm)

2"x1" Reducing Insert Coupling.

2" Insert Plug.

Lapierre Straight Tubing Adapter for Spout Reducer - While Supplies Last

Grey Button on top of Releaser Float Rod.

Ball for CDL Moisture Trap.

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

1" Stainless Drawoff Valve for WSE Evaporator.

10" H2O 9 Frame Filter Press w/Air Diaphragm Pump and Stand.

Smart Trek Vacuum Sensor - Three Ports

Single pan with shallow raised flues in the back, and 3 divided flat sections in the front. Comes with a float box. Capacity 40-80 taps. Requires 5...

H2O Horizontal Electric Vacuum Releaser with Manifold. With a 1/2 hp Submersible pump. Good for pumping up to 10' in elevation and good for roughly...

CDL 3 HP Vacuum Pump, Oil Cooled Vane-Pump for up to 3,000 Taps.

H2O 3" Electric Vortex Deluxe Moisture Trap.

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

325 Gallon H2O Stainless Tank.  This tank has the elevated frame so you do not have to raise the tank up to put a valve on it.  This tank has a 2" ...

H2O Econox 600 RO Machine. The Econox line is designed for producersowning between 1,000 to 15,000 taps- Compact, takes less than 5 sqft of floor ...

A mainline reducing tee that goes from 1 1/4" down to 1" with a 3/4" branch line.

44" Grimm Grates. These are closer to 43.5" in length and 3.5" wide.

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 39.25" long and...

H2O Vertical Electric Releaser with 1 HP Pump, 12"x36" (no manifold). 15 gpm pump capable of pumping up to 30' in elevation. Sap inlet height of 21...

H2O Dual Compartment Insulated Draw-off Tank on Wheels. Comes with two 20 Gallon Compartments that have an overflow in them, and sliding covers on ...

2'x4' Leader Vermonter Evaporator w/Raised Flue Pan. Comes with a stainless natural draft arch and 9' of stainless stack. It is all one pan with 10...

1" Plastic Check Valve (slip x slip)

1 1/2" x 1/2" Reducing Bushing

1 1/4" x 1/2" Reducing Bushing

2" Mainline Tee with 1/2" FPT.

1.5"x1.5" Insert Tee with 1 1/4" FPT

1 1/2" Barbed x 1 1/4" Barbed x 1/2" FPT Mainline Reducing Tee

1.5"x1.5"x3/4" Reducing Insert Tee

1 1/2" x 1 1/2" x1/2" Reducing Insert Tee

1 1/2" x 1 1/4" x 3/4" Reducing Insert Tee

1 1/2" x 1 1/4" x 1" Reducing Insert Tee