B2B Catalog Collection

44" Grimm Grates. These are closer to 43.5" in length and 3.5" wide.

The Grimm style grates have flat ends. The area the wood sits on is flat, but the bottom side has a little bow to it. This grate is 39.25" long and...

H2O Vertical Electric Releaser with 1 HP Pump, 12"x36" (no manifold). 15 gpm pump capable of pumping up to 30' in elevation. Sap inlet height of 21...

H2O Dual Compartment Insulated Draw-off Tank on Wheels. Comes with two 20 Gallon Compartments that have an overflow in them, and sliding covers on ...

2'x4' Leader Vermonter Evaporator w/Raised Flue Pan. Comes with a stainless natural draft arch and 9' of stainless stack. It is all one pan with 10...

1" Plastic Check Valve (slip x slip)

1 1/2" x 1/2" Reducing Bushing

1 1/4" x 1/2" Reducing Bushing

2" Mainline Tee with 1/2" FPT.

1.5"x1.5" Insert Tee with 1 1/4" FPT

1 1/2" Barbed x 1 1/4" Barbed x 1/2" FPT Mainline Reducing Tee

1.5"x1.5"x3/4" Reducing Insert Tee

1 1/2" x 1 1/2" x1/2" Reducing Insert Tee

1 1/2" x 1 1/4" x 3/4" Reducing Insert Tee

1 1/2" x 1 1/4" x 1" Reducing Insert Tee

2"x2"x1 1/4" Reducing Insert Tee

1 1/4" x 1" x1/2" Reducing Insert Tee

2"x2"x1 1/2" Reducing Insert Tee

2"x1 1/4" Reducing Insert Coupling

3/4" Barbed Plastic Cross

1/2" Inlet Fitting for Hand Pump with Female Thread.

1 1/4" Plastic Check Valve, slip x slip fittings (no threads)

12"x36" H2O Vertical Electric Vacuum Releaser w/One 1/2 HP Pump. Will pump sap up roughly 12' in elevation. Good for up to 2000 taps.

18"x36" H2O Horizontal Electric Vacuum Releaser w/Manifold and three 1 HP Pumps. The back manifold has 6 - 1 1/4" holes in it for hooking up sap li...