Evaporators

Ideal for up to 50 taps Evaporates up to 7 GPH 2-in-1 solution No bricking needed Includes: 2′ x 3′ stainless steel pan 3/4′ stainless steel ball...

2'x3' Tom's Welding Hobby Evaporator with Welded Pans. This evaporator is designed for someone with 15-50 taps. It has a 3 section stainless pan, a...

A complete Leader 1/2 Pint evaporator. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. The arch is made fr...

A complete Leader 1/2 Pint evaporator with a supreme pan. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. ...

16"x48" Lapierre Propane Evaporator w/Welded (raised flue) Pans and three 65,000 btu Burners

An evaporator for the back yard producer. This evaporator comes with a stainless wood fired arch, with grates, cast iron door, and a stainless base...

An evaporator for the back yard producer. This evaporator comes with a stainless wood fired arch, with grates, cast iron door, and a stainless base...

Single pan with shallow raised flues in the back, and 3 divided flat sections in the front. Comes with a float box. Capacity 40-80 taps. Requires 5...

18"x48" Lapierre Vision Evaporator w/Standard(Raised Flue) PansLapierre's VISION line is designed for hobby or smaller sugarmakers or those without...

2'x4' Leader Vermonter Evaporator w/Raised Flue Pan. Comes with a stainless natural draft arch and 9' of stainless stack. It is all one pan with 10...

2'x6' Lapierre Vision Evaporator with Classic PansLapierre's VISION line is designed for hobby or smaller sugarmakers or those without electricity....

Leader WSE 2’ x 6’ Evaporator The Leader WSE is tig welded of 20 gauge bright annealed stainless steel solid stainless steel connections, and clamp...

2’ x 6’ complete evaporator consisting of stainless 2’ x 4’ pan with7” raised flues and sap level regulator, 2’ x 2’ stainless cross flow syrup pan...

A small stainless syrup pan for someone with a couple taps or someone who is looking for a small pan to finish their syrup in. It could be put righ...

A replacement 2'x2' syrup pan for either a 2'x4' or a 2'x6' Leader WSE evaporator. This is a 3 section welded syrup pan. It does not come with a va...

A 3-section tig welded stainless syrup pan. This pan measures 24"x33" and has a 1/2" fitting (female threads) on 2 opposite corners to draw off fro...

A 24"x33" Supreme pan that is 3 sections with the outside compartments being flat and the middle compartment containing shallow drop flues. There a...

A replacement 4 section welded syrup pan. This pan has the wire hangers in it for the Z arm regulator to hook to. Hooks up to a Leader Patriot flue...

This is a new 30"x30" welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the e...

This is a new 3'x3' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

Leader 2x4 Vermonter Pan (raised flue)

2x6 Set of WSE Raised Flue Pans w/Fitting Kit. While we try to keep this item in stock, you should call for availability.

A stainless welded preheater pan for the CDL 18" wide evaporators. Comes with a valve. This pan measures 18" wide x 6" long and 10" deep. This pan ...

Preheater Pan for Evap O Grill 24"x8"x8".

A stainless preheater/reservoir pan for a Leader 1/2 Pint evaporator. This pan measures 24" wide, 7" long and 7.5" deep. It comes with a valve, and...

Just the firebox for a Leader 1/2 Pint evaporator. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. The arc...

1/2 Pint Leader Oil Fired Arch w/Oil Burner and Insulation. Comes with a Carlin Oil Burner, and the arch is lined with ceramic blanket. Takes a 24"...

This extension is made to lengthen out a half pint arch so a second pan can be added. This extension is 33" long and will double the length of your...

Half Pint Arch Extension to make it a 48" Arch. This extension bolts on to the back of a 1/2 pint arch and enables someone to put a 2'x4' pan on th...

2' Preheater Pan for Hobby Evaporator. 24" wide x 6" and it is 8" deep/tall.  Has a 1/2" fitting with female threads for a valve.