Evaporators

Ideal for up to 50 taps Evaporates up to 7 GPH 2-in-1 solution No bricking needed Includes: 2′ x 3′ stainless steel pan 3/4′ stainless steel ball...

2'x3' Tom's Welding Hobby Evaporator with Welded Pans. This evaporator is designed for someone with 15-50 taps. It has a 3 section stainless pan, a...

A complete Leader 1/2 Pint evaporator. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. The arch is made fr...

A complete Leader 1/2 Pint evaporator with a supreme pan. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. ...

16"x48" Lapierre Propane Evaporator w/Welded (raised flue) Pans and three 65,000 btu Burners

An evaporator for the back yard producer. This evaporator comes with a stainless wood fired arch, with grates, cast iron door, and a stainless base...

An evaporator for the back yard producer. This evaporator comes with a stainless wood fired arch, with grates, cast iron door, and a stainless base...

Single pan with shallow raised flues in the back, and 3 divided flat sections in the front. Comes with a float box. Capacity 40-80 taps. Requires 5...

18"x48" Lapierre Vision Evaporator w/Standard(Raised Flue) PansLapierre's VISION line is designed for hobby or smaller sugarmakers or those without...

2'x4' Leader Vermonter Evaporator w/Raised Flue Pan. Comes with a stainless natural draft arch and 9' of stainless stack. It is all one pan with 10...

20"x84" CDL Evaporator Drop Flues and Two Cross Flow Syrup Pans, New. Comes with a Stainless Arch, Stack, and Cover.  Discontinued Model. 

2'x6' Lapierre Vision Evaporator with Classic PansLapierre's VISION line is designed for hobby or smaller sugarmakers or those without electricity....

Leader WSE 2’ x 6’ Evaporator The Leader WSE is tig welded of 20 gauge bright annealed stainless steel solid stainless steel connections, and clamp...

2’ x 6’ complete evaporator consisting of stainless 2’ x 4’ pan with7” raised flues and sap level regulator, 2’ x 2’ stainless cross flow syrup pan...

A small stainless syrup pan for someone with a couple taps or someone who is looking for a small pan to finish their syrup in. It could be put righ...

A replacement 2'x2' syrup pan for either a 2'x4' or a 2'x6' Leader WSE evaporator. This is a 3 section welded syrup pan. It does not come with a va...

A 3-section tig welded stainless syrup pan. This pan measures 24"x33" and has a 1/2" fitting (female threads) on 2 opposite corners to draw off fro...

A 24"x33" Supreme pan that is 3 sections with the outside compartments being flat and the middle compartment containing shallow drop flues. There a...

A replacement 4 section welded syrup pan. This pan has the wire hangers in it for the Z arm regulator to hook to. Hooks up to a Leader Patriot flue...

This is a new 30"x30" welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the e...

This is a new 3'x3' welded 4 section syrup pan. Made to fit either a Patriot or a Grimm raised flue pan. This pan has a box on each side of the eva...

Leader 2x4 Vermonter Pan (raised flue)

2x6 Set of WSE Raised Flue Pans w/Fitting Kit. While we try to keep this item in stock, you should call for availability.

A stainless welded preheater pan for the CDL 18" wide evaporators. Comes with a valve. This pan measures 18" wide x 6" long and 10" deep. This pan ...

Preheater Pan for Evap O Grill 24"x8"x8".

A stainless preheater/reservoir pan for a Leader 1/2 Pint evaporator. This pan measures 24" wide, 7" long and 7.5" deep. It comes with a valve, and...

Just the firebox for a Leader 1/2 Pint evaporator. This arch measures 24" wide and is 33" long. Comes with a cast iron door and steel legs. The arc...

1/2 Pint Leader Oil Fired Arch w/Oil Burner and Insulation. Comes with a Carlin Oil Burner, and the arch is lined with ceramic blanket. Takes a 24"...

This extension is made to lengthen out a half pint arch so a second pan can be added. This extension is 33" long and will double the length of your...

Half Pint Arch Extension to make it a 48" Arch. This extension bolts on to the back of a 1/2 pint arch and enables someone to put a 2'x4' pan on th...

2' Preheater Pan for Hobby Evaporator. 24" wide x 6" and it is 8" deep/tall.  Has a 1/2" fitting with female threads for a valve.