Filtering & Canning

A fast and simple way to empty syrup drums. All stainless steel construction. Screw it into a drum, and air is blown into the drum to push the syru...

Air Regulator for Drum Dispenser.

A steel can with an epoxy coating on the inside. These cans have a two to three year life span and then the epoxy coating starts to flake off. Come...

A replacement cover for the metal epoxy lined 5 gallon cans.

A seal for the metal epoxy lined 5 gallon cans. New cans come with a seal, but if you want to reuse the can you may want a new seal.

A new blue plastic 5 gallon container. While we say they are 5 gallon containers they actually hold 20 liters. These blue 5's are rectangular and m...

Replacement covers for the blue plastic 5 gallon cans. There is a 3/4" thread in the middle of these covers where a valve (Item # D5GF75) can be ad...

3/4" Plastic Faucet for 5 Gallon Plastic & Rieke Top Can

A replacement cap for the vent on the current blue plastic 5 gallon containers. Measures about 1" in diameter.

Rubber Gasket/Seal for Blue Plastic 5 Gal Container

A wrench designed for the covers on the blue plastic 5 gallon containers. This wrench works much better than a pair of channel locks. A nice tool t...

A 15 gallon stainless drum that is similar to a keg. These drums have a 2" opening in the center of the top of the drum, and no other fitting on th...

A steel barrel with an epoxy coating on the inside. This drum weighs 30 lbs. These drums have a two to three year life span and then the epoxy coat...

A 40 Gallon stainless Barinox drum. This drum has just one 2" bung on the top, no other fittings. The tare weight is 48 pounds. They stand 30" tall...

A steel barrel with an epoxy coating on the inside. These drums have a two to three year life span and then the epoxy coating starts to flake off.

A 4-wheeled drum cart for moving syrup drums around. This cart makes moving drums so much easier than trying to roll them around by hand. It has a ...

This drum bung wrench works great on the stainless drums and the epoxy lined drums. It does not work so well with the plastic drums. If you are put...

This is a 2" tri-sure bung. This is the same type of bung that is used in the stainless Barinox drums that we sell.

A thin/wide black rubber gasket for a tri-sure bung. Many of these bungs came with a hard plastic gasket, but we are unable to get those, and these...

A thick gasket for for a Rieke bung. Sometimes these gaskets are plastic sometimes they are more of a rubber material.

A 3/4" bung for stainless drums. This bung would be a replacement for the smaller bung that can be used as a vent on some drums.

A replacement gasket for a 3/4" bung. These black rubber gaskets will fit almost any 3/4" bung.

A drum over-flow control valve for those producers that fill drums. The unit fits down into the drum and has an overflow hose with a hook on the en...