Inventory Equals Zero

A glass bottle in the shape of a maple leaf. The back of the bottle is smooth so you can put a label on it, or you could use a hang tag. The bottle...

3/4" Stainless Steel Insert Coupling

This rubber candy mold has 20 cavities. Each cavity is in the shape of a Christmas tree and measures 1" wide x 1 1/4" tall at the widest parts. Cli...

H2O 36" Precut Dropline, Blue. These come nice and straight. However, if we ship them they may get bent to fit in the box and have a small curve to...

A heart shaped rubber mold with 20 cavities. These hearts are smaller in size and measure approximately 1" wide x 1" tall. Click for care instructions

A glass bottle in the shape of a tree, but is flat on the front and back. At the widest point the bottle measures 5.5" wide and is 7" tall. This bo...

This rubber candy mold has 16 cavities. It comes with variety of shapes including a Christmas bell, star, Christmas tree, holly, Santa's head, and ...

A decorative bottle in the shape of a gingerbread man. This gingerbread man is 2.5" wide and stands 4.5" tall. He holds 50 ml or 1.7 ounces. A fun ...

The Sugarmaker’s Companion is the first guide of its kind addressing the small- and large-scale syrup producer seeking to make a profitable busines...

New York Maple baseball hat available in green or blue.

Massachusetts Maple baseball hat available in green or blue.

Connecticut Maple baseball hat, available in green or blue.

Pure Maple Syrup baseball hat available in green or blue.

Vermont Maple baseball hat, available in green or blue.

Stainless Insulation Clip

This hose is used for hooking a line up to the cold sap float box. Used on the Leader WSE evaporators and also some of the older styles. Stainless ...

A light weight insulation used for insulating a wood fired evaporator between the baffolds. Using vermiculite will do a better job insulating than ...

Compatible with drill models DCD-796, DCD-797, DCD-996, and DCD-999 *Drill Not Included.* Designed to perfect and stabilize tap hole drilling.Quick...

Mainline Fitting Tool (1"-1 1/4")

7" Hollow Frame only for Wes Fab/CDL Filter Press

7" Waffle Plate only for Wes Fab/CDL Filter Press

A replacement diaphragm for a filter press with a hand pump. These only need to be replaced when one gets a hole in it.

Stainless Steel Pins for Insulating Arch.

CDL Nano Max RO Machine w/Two 4"x20" Membranes (for 250 to 750 taps). Will remove up to 29 gph of permeate going from 2% to 5%.

Maple Leaf Home Sweet Home Sign (rustic) Screws included

A hot sap regulator for a Small Brothers evaporator. The yoke goes over the elbow and hangs on the 1" feed pipe to the front pan. There is a piece ...

This bracket is made to hang on the side of a Leader welded flue pan and then you can mount your Marcland control box right on it. The bracket fits...

A Filtering unit that uses vacuum to help draw the syrup through a filter. You need a shop-vac or a vacuum pump to create the vacuum, and that help...

Female Garden Hose Swivel x 3/4" Female Pipe Thread.

10" H2O 3 Frame Filter Press with an Air Diaphragm Pump on a Cart.

This is the stainless auger for a Grimm/Leader candy machine. This worm sits in the trough and moves/mixes the syrup along.

This would be the trough that the worm sits in on a Grimm/Leader candy machine. Comes with the valve, but the worm is sold seperate.

100 Gallon CDL Stainless Storage Tank (2'Wx4'Lx2'H)

Blue Plastic Vent Cap for 8" Tank Cover.

10" Filter for Airablo Oil Reclaimer. This filter is 6.5" in diameter and about 15" long. This filter goes inside the oil reclaimer.

Atlanti Fluid Vacuum Pump Oil (5 gallon pail).

Plastic Hand Pump Bottom Base

5'x20" CDL SS Welded Cross Flow Syrup Pan. This pan has 2" tri-clamp fittings on the end.

1"x1"x3/4" Mainline Reducing Tee

1 1/4" Y Strainer.

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

18" Rope Operated Stack Cover

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

Please call in to order this item. We need to know if you would like a 60 degree solid or a 45 degree hollow nozzle and what size gph nozzle.

3 HP Airablo Vacuum Pump w/Flood Oil System and Oil Cooler Kit (30 cfm)

14" Stainless Steam Stack.

This would be just the pig for a Grimm/Leader candy machine. This pan is welded and has the valve on the snout.