Inventory Equals Zero

Leader 5/16 Tee w/Plug for Stubby Spout and Tubing

This syrup can has an old fashioned sugaring scene on it. It has a nutrition label on the back and a space on the side for a producers label. If yo...

LaBasqu Clear Pure Maple Syrup Oval Label (100/roll)

A plain glass jug, with a handle. The jug is 4" in diameter and is 9.5" tall, and holds 1 liter/33.8 ounces. The height for a label on this jug is ...

Ayres HydrothermA hydrotherm combines a hydrometer and a thermometer into oneunit. Just float the hydrotherm in syrup and when the red/blue line is...

This thin rubber packing is used for the cold sap regulator on many of the Leader and Grimm evaporators. Leader has also started using it on the re...

Digital Candy Thermometer w/10" Stem

Maple Leaf Plastic Sucker Mold w/5 Cavities

CDL Work Apron.

Mainline Fitting Tool (3/4"-1")

This drum bung wrench works great on the stainless drums and the epoxy lined drums. It does not work so well with the plastic drums. If you are put...

These paper prefilters are most commonly used in canning units, or occasionally as a sap filter. They are designed for single use, however can be r...

Leader Powdered RO Soap, 2 Lbs (for Filmtec & Fluid System membranes).

Vermont Maple baseball hat available in green or blue.

This rubber candy mold is in the shape of a little chick. The mold has 20 cavities and they measure 1" wide x 1 1/4" tall.

Moose Plastic Sucker Mold

Pure Maple Syrup For Sale Here Maine Sign 18"x24"

M-126 Male Adapter Plug 1/2" or 3/4"

M-127 Female Camlock 1/2" or 3/4" Cap Plug

A stainless welded preheater pan for the CDL 18" wide evaporators. Comes with a valve. This pan measures 18" wide x 6" long and 10" deep. This pan ...

Maple Origin 3 Piece Bowl Set (lapis - blue color) 1) 7 1/2"x3 1/4" Bowl, 1) 10"x4" Bowl and 1) 12"x5" Bowl

Glucose for Making Hard Candies or Lollipops 6.5 kg

1 1/4" Mainline Tension Grip

Refractometer Calibration Solution

Stainless Insulation Clip

16" x 16" Pan Only.

Leader Spout Hammer with Wooden Handle.

A replacement diaphragm for a filter press with a hand pump. These only need to be replaced when one gets a hole in it.

Extra Blade for Tubing Cutter

Pure Maple Syrup For Sale Here CT Sign 18"x24"

Apron for Tubing Fittings.

A Leader Fill-Stop canning valve. This Fill-Stop is 120 volt. It has a wire that sits inside the jug and when the syrup comes up and touches the wi...

1" Clear Plastic Check Valve

Santa Head Plastic Sucker Mold

A hot sap regulator for a Small Brothers evaporator. The yoke goes over the elbow and hangs on the 1" feed pipe to the front pan. There is a piece ...

16" x 16" Rack Only

1" S.S. Mainline Tee (Bottom Piece w/1/2" Threaded Hole)

A stainless preheater/reservoir pan for a Leader 1/2 Pint evaporator. This pan measures 24" wide, 7" long and 7.5" deep. It comes with a valve, and...

A complete 20" filter cartridge housing. This unit has the bottom piece that holds the filter and also the top plastic piece that the inlet and out...

Small Maple Leaf w/Hook (metal)

Female Garden Hose Swivel x 3/4" Female Pipe Thread.

Pure Organic Maple Syrup For Sale Here Sign 18"x24"

A replacement 10" filter cartridge housing. This is just the bottom piece that holds a 10" cartridge filter for an RO.

Repair Kit for 1 Hand Tubing Fitting Tool

A small black o-ring that goes in top of the plastic housing for cartridge filter. This o-ring also fits the the stainless cartridge housings. This...

Atlanti Fluid Vacuum Pump Oil (5 gallon pail).

Plastic Hand Pump Bottom Base

1 Gallon Airablo Vacuum Pump Oil.