Inventory Equals Zero

3/16" Leader Dark Blue Max Flow 50 Tubing (800' roll).

A rubber mold in the shape of a small maple leaf. This mold has 20 cavities with each cavity holding 1/3 oz of candy. Each leaf measures 1 3/8" wid...

Designed to be used with the 12" round vacuum syrup press. The filter can be rinsed with hot water and reused. They should be used with prefilters ...

A Murphy cup removes the need for temperature calculations. The dial is a thermometer, with the temperature face removed and replaced with the appr...

The same shape as one of our most popular glass bottles, this decorative bottle holds slightly more than 8oz. It has a printed sugar house scene o...

The same shape as one of our most popular glass bottles, this decorative bottle holds slightly more than 8oz. It has a printed sugar house scene on...

New/replacement wires for flat bucket covers. These are designed specifically for the flat metal covers.

A new 55 gallon plastic drum with a removable top. There is a clamp that goes around the cover to hold it in place. These drums will work for sap, ...

1/2 " Mainline Tee with 5/16" Tubing Barbs

Plastic (polyethylene) bags for candy suckers. Size: 3" x 5"

A small stainless syrup pan for someone with a couple taps or someone who is looking for a small pan to finish their syrup in. It could be put righ...

A small bunny shaped candy mold. Each of the 20 cavities has a little bunny that looks like it is ready to hop away. The cavities measure 1" long a...

Kwik Cut Mainline Cutter

A gallon jug of Atmos 300 defoamer. This defoamer works wonders at keeping the foam down while you are boiling. If you have some defoamer left at t...

1/2" Stainless Coupling w/Female Thread .

1/2" Electric Diaphragm Pump.110v pump that will pump up to 5.3 gpm.Small enough to carry around. No warranty.

This simple VT grade label has all the pertinent information printed on a 7/8" circle sticker. The words are on a leaf backdrop, which reflects the...

A drum over-flow control valve for those producers that fill drums. The unit fits down into the drum and has an overflow hose with a hook on the en...

1 lb Roll of no lead Solder (stainless steel & tin solder). 

Gasket for Leader 3/4" Saddle

This is an almond D&G plastic jug. The front has a oval sugar house scene, bordered with "Pure maple syrup" and the jug capacity information on...

3" Maple Leaf w/Earthen Magnet (Red)

A small bag filter used in some RO's for filtering sap. It can be used in other places within a set up for filtering sap as well, although the FPOP...

For off season storage. Used to inhibit bacterial growth.

1/2" S.S. Threaded Adapters

Small Maple Leaf with Hook (metal). 3" wide x 4 1/2" long

CDL Diaphragm Vacuum Pump w/Two Diaphragms and Electric Motor (for 600 +/- taps).

12" Maple Leaf (metal)

14" Rope Operated Stack Cover

1" Poly Pipe w/Nylon Cord

Black Metal Maple Leaf Sap Bucket with Hook. 5.5" tall and 2" wide. 

Male Adapter w/ 5/16" Insert x 1/4" Pipe Thread (for Bernard vacuum releasers).

160 Gallon CDL Stainless Storage Tank (2'Wx4'Lx3'H).

230 Gallon CDL Stainless Storage Tank (3'Wx4'Lx3'H)

DSD Orange Tapping Vest (Large).  This vest is light weight, and has many pockets so you can have all your fittings and tools easily within reach. 

Designed for producers under 250 taps, the Mini Micro offers super quiet operation and unparalleled mobility (rugged, dual carry handles.) Removes...

The outline of the state of New Hampshire with a maple leaf cut out in it. Made out of 14 gauge steel, this piece is made to last. Measures 16" tal...

Regular/daily soap wash, for during the sugaring season This is the soap referenced in the MicroRO and MiniMicroRO instruction manuals.  Dilution p...

The outline of the state of New York with a maple leaf cut out in it. Made out of 14 gauge steel this piece is made to last. Measures 12" tall and ...

3/4"x500' Roll of Black 30P Leader Mainline. The smooth inner walls reduce bacteria buildup and the LDPE material provides for less thermal expansion.

Umbrella Valve Kit for Diaphragm Vacuum Pump.

1/2" Air Diaphragm Pump for Filter Press.

This candy machine is a great way to increase your maple profits. This machine will reduce the labor involved in making maple candy. The stainless ...

16" Old Style Tank Cover w/Black Vent Cap

6" O-Ring for H2O Vacuum Releaser.

Plastic Vacuum Pump Base for Guzzler 500 Diaphragm Pump.

10" Filter Press Stop/Blocker Plate. Used to shorten up a 10" press and block off part of it on those smaller production days when you don't need a...

Tired of washing all those felt filters, or just waiting for the syrup to drip through the filters? Maybe it is time for a filter press. This press...