Inventory Equals Zero

2' Preheater Pan for Hobby Evaporator. 24" wide x 6" and it is 8" deep/tall.  Has a 1/2" fitting with female threads for a valve. 

Variety Plastic Hard Candy Mold

10" H2O 3 Frame Filter Press with an Air Diaphragm Pump on a Cart.

3" Dial Thermometer, 0-50 with 6" Stem and Swivel Head

2" Clear Plastic Check Valve.

Kwik 2 HP Electric Rotary Vane Vacuum Pump. Single Phase 13 cfm @ 20" InHg, max 29" InHg.

Double Draw-off Nozzle 2" Tri-clamp Fitting. Easily switch from one side of a draw-off tank to the other without having to move the tank. Roughly 1...

This extension is made to lengthen out a half pint arch so a second pan can be added. This extension is 33" long and will double the length of your...

1/2" Threaded Adapter to 1" Barbed

A complete 20" filter cartridge housing. This unit has the bottom piece that holds the filter and also the top plastic piece that the inlet and out...

New 8 CFM Airablo Pump Head

1061 Gallon CDL Stainless Storage Tank (4'Wx12'Lx3 1/2'H)

H2O 25 Gallon Round Draw-off Tank (with cover) 21"x26". It has a 3/4" threaded coupling down at the bottom. 

10"x30" D&G Vertical Electric Releaser 110v with 1/2hp Pump (for up to 1,800 taps).

Maple Leaf Sleigh Bells

Female Garden Hose Swivel x 3/4" Female Pipe Thread.

18"x36" H2O Vertical Electric Vacuum Releaser w/Manifold and two 1/2 HP Pumps. The back manifold has 6 - 1 1/4" holes in it for hooking up sap line...

Vertical Double Vacuum Releaser (up to 3,000 Taps). These are the most reliable sap extractor units on the market. When connected to a vacuum pump,...

A 4-wheeled drum cart for moving syrup drums around. This cart makes moving drums so much easier than trying to roll them around by hand. It has a ...

Lapierre (small) Horizontal Single Releaser (for up to 1500 taps). It has 7 - 1" holes drilled in the back manifold.

Small Brothers Flue Pan Regulator Arm

D&G/Airablo 8 cfm Gas Powered Oil Cooled Vacuum Pump (manual start) with a moisture trap. 

Small Sap Regulator Bridge.

22" Stainless Smoke Stack.

Wheel Support for H2O 25 Gallon Round Drawoff Tank. With 4 wheels.

18" Stainless Smoke Stack.

Leader WSE 2’ x 6’ Evaporator The Leader WSE is tig welded of 20 gauge bright annealed stainless steel solid stainless steel connections, and clamp...

Please call to order Roof Jacks as we need additional information. All Roof Jacks are Custom Ordered and are not a stock item. Average lead time is...

519 Gallon Lapierre Stainless Tank (4'Wx8'Lx33 1/4"H)

Base Stack for a 60" Wide Arch Stainless

Smart Trek Smart Station (Gateway, tablet, tank level and single port sensor). H2O-Smartrek Monitoring SystemThe H2O-Smartrek system is a highly ef...

CDL 2hp Oil Cooled Vacuum Pump (single phase).  For up to 1,700 taps. 

9" SS Smoke Stack 4' long.

2’ x 6’ complete evaporator consisting of stainless 2’ x 4’ pan with7” raised flues and sap level regulator, 2’ x 2’ stainless cross flow syrup pan...

A Leader forced draft grate that is 30" long and 8" wide.

Leader Water Jacketed 18 Gallon Canning Tank w/Stand and a 3000 watt Heating Element.

A replacement ring for a filter press with a hand pump. This is the ring that holds the diaphragm in place and the handle attaches too. This ring i...

10" Filter for Airablo Oil Reclaimer. This filter is 6.5" in diameter and about 15" long. This filter goes inside the oil reclaimer.

Used 325 Gallon Horizontal Plastic Tank with a 2" Drain. This tank has a 16" cover on top. The tank measures 38" wide x 68" long x 43" high.

500 Gallon Rectangular Stainless Milk Bulk Tank. One of the legs is missing, but the previous owner just used a block of wood.  A hole was cut in t...

2" Butterfly Valve Repair Kit  - for a Leader 2" Butterfly valve. 

Pressure Switch for a Micro RO

1hp Shakti SS Pump w/ Switch for a Micro RO.

10" H2O 3 Frame Filter Press with an Electric Diaphragm Pump.

H2O Horizontal Electric Vacuum Releaser with Manifold. With a 1/2 hp Submersible pump. Good for pumping up to 10' in elevation and good for roughly...

Grey Button on top of Releaser Float Rod.

18" Stainless Steam Stack.

2'x4' Stainless Hood.