Used Equipment

Used BHR Hobby Double Vacuum Releaser for up to 1,000 taps.

Used 2'x2' Smokey Lake Welded Syrup Pan (Grimm copy).

Steam Kettle, Vulcan Hart Corp. Model SL40. We believe it may hold 40 gallons, but not sure of that.

Electric Sap Guzzler Diaphragm Vacuum Pump (for up to 300 taps).  Each side has been reduced down to 1". 

3'x3' Waterloo Welded Syrup Pan. There are a few hot spots/dings on the bottom of the pan. 

Used Electric Single Diaphragm Vacuum Pump with 1.25" inlet and outlet. No releaser needed.

Used 425 Gallon Plastic Pickup Tank. There is a hole in the cover that has been taped over. Comes with a 2" valve on the tank. 

RO Bucket Kit (RB25) for 200 +/- Taps. It has 5 - 8gph membranes. Mounted on a wooden board that is roughly 4' long and from the floor to the top o...

Used CDL 9" Vacuum Filter Press. This vacuum press does not come with any filters. 

Leader 3'x5' Aluminum Hood with Preheater. The Preheater appears to be homemade. 8" Thimble on the hood, and it comes with 1 section of stack. 

Used 16"x16" Leader Gas Canner with SS Pan, Filter Rack, Cover, Valve and Thermometer.

D&G Round Drawoff Tank on Wheels w/Cover (25 +/- gallons). 28.5" from the floor to the top of the cover (not counting the handle). The tank its...

Used Marcland Automatic Draw-off Complete with a Brass Paddle Valve. Comes with the Temperature Probe and wire.

550 Gallon Plastic Vertical Tank. It has a 2" drain fitting (female threads) down near the bottom. There are several holes drilled in the top of th...

Used Pump for a Micro1 or Micro2 RO Machine. Customer had it as a spare, but traded in his RO machine towards a larger one. 

A 10' wide blower unit designed to go over an over-head door and provide a curtain of air to keep pests out of the room or building.

8" Maple Guy's Filter Press (for a Small Producer) w/Papers.

40"x20" Welded Cross Flow Syrup Pan, Excellent. 2" tri-clamp pan connections, and 1.5" tri-clamp drawoff fittings. 

Used 325 Gallon Poly Pickup Tank. Made to fit in the back of a truck.

42"x36" Lapierre/Waterloo Welded Cross Flow Syrup Pan.

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

5'x20" CDL SS Welded Cross Flow Syrup Pan. This pan has 2" tri-clamp fittings on the end.

4'x4' King Lead Free soldered syrup pan. Both draw-offs have been repaired.

Used 125 Gallon Horizontal Plastic Tank w/Valve