Used Equipment

Used 30"x5.5' Steamaway Pan. Welded pipes made in 2010. Comes with the blower. It has a window and a light in it. Right Side Feed and outlet. Blowe...

2'x6' Set of Lapierre Pans (New). 7" Raised Flues in the back and a 3 section syrup pan. Comes with the float boxes, floats, and pan connections. 

18"x4' Lapierre Accordion Pan w/Shallow Flues (New) and a float system. 

2'x2' Leader revolution Syrup Pan, Right Draw w/Closed Box (New Factory Second).

19"x32" Lapierre Mini Pro Model Flue Pan (New). Does NOT come with any float box or fittings. 

4'x6' Leader American (welded) Syrup Pan. This pan is in very good condition.

3'x20" Leader Welded Cross Flow Syrup Pan (New)

2'x5' Leader Welded Finishing Pan (New, factory second).

Used 2'x2' Patriot Welded 4 Section Syrup Pan.

24"x24" Lapierre Junior Model Syrup Pan (New).

19"x16" Lapierre Mini Pro Syrup Pan (New).

30"x18" Leader Welded Cross Flow Syrup Pan (New). With open boxes and threaded drawoff fittings.

18"x48" Lapierre Flat Bottom Syrup Pan w/Valves (New)

24"x16" Lapierre Junior Model Syrup Pan (New). Left Front/Back Right for the boxes. 

24"x16" Lapierre Junior Model Syrup Pan (New). Boxes on the Left Back and Front Right. 

36"x20" Lapierre-Waterloo Cross Flow Syrup Pan (New). With 1.5" tri-clamp fittings on the pan.

24"x24" Lapierre Waterloo Cross Flow Syrup Pan (New).

30"x20" Lapierre-Waterloo Cross Flow Syrup Pan (New) with 1.5" Triclamp Fittings. 

19"x36" Lapierre Mini Model Flat Syrup Pan w/Divider (New)

Used 1/2 Pint Welded 3 Section Syrup Pan. This pan has a little discoloration towards one end. 

Used Leader 1/2 Pint Welded Syrup Pan w/Valve

3'x3' Mason Welded Syrup Pan (made as a Grimm copy). Has been scorched. Has 3/4" drawoff size (no valves). 

18"x4' Lapierre Flat Bottom Syrup Pan (no dividers) New

Used 2'x25" Welded 3 Section Syrup Pan.

40"x20" Welded Cross Flow Syrup Pan, Excellent. 2" tri-clamp pan connections, and 1.5" tri-clamp drawoff fittings. 

Used 16"x16" Leader Pan with Cover, Valve and Thermometer.

Used 16"x24" Leader Finishing Pan. 1/2" threaded fitting for a valve. This pan has a hole in the backside where a hose was put in for filling. 

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

4'x2' Welded Cross Flow Syrup Pan. This is a Leader copy made by Lapierre. The pan does have some burn spots on it. 

21"x21"x18" Stainless Welded Pan with Stainless Cover and Handles. This is pan was made with a thicker stainless. It has a 1/2" draw-off fitting an...

16"x16" Lapierre Pan (New)

30"x18" SB Soldered Finishing Pan with Cover.