Weight Equals Zero

A 10' wide blower unit designed to go over an over-head door and provide a curtain of air to keep pests out of the room or building.

14" Stainless Roof Jack, Leader Style, 10/12 Pitch, Side mount.

18" Stack Cover w/3' of 18" Galvanized Smoke Stack.

18"x4' Lapierre Flat Bottom Syrup Pan (no dividers) New

18"x48" Lapierre Flat Bottom Syrup Pan w/Valves (New)

19"x16" Lapierre Mini Pro Syrup Pan (New).

19"x32" Lapierre Mini Pro Model Flue Pan (New). Does NOT come with any float box or fittings. 

19"x36" Lapierre Mini Model Flat Syrup Pan w/Divider (New)

2 1/2' x 6' Stainless Syrup Pan (scorched) Sold As Is

2 1/2' x 8' Grimm Arch w/Blower (no stack).

2'x2' Leader revolution Syrup Pan, Right Draw w/Closed Box (New Factory Second).

2'x2' Stainless Front Pan Hood (New). There is no thimble or stack with this hood. 

2'x4' Set of Leader WSE Pans, (drop Flue) Pans were made in 2008 but never used.

2'x8' Lapierre Vision Evaporator with Cross Flow Pans, Blower and Fire Bricks.  The glass on the front has been replaced with a steel plate, and a ...

22" Diameter Round Open Topped Draw-off Tank w/Valve and Wooden Stand. Stands 21" tall. 

24"x16" Lapierre Junior Model Syrup Pan (New). Boxes on the Left Back and Front Right. 

24"x16" Lapierre Junior Model Syrup Pan (New). Left Front/Back Right for the boxes. 

24"x24" Lapierre Waterloo Cross Flow Syrup Pan (New).

A plastic tank on a pallet with a metal cage around the tank. These tanks come with a cover on the top, and a valve on the bottom.

28"x34" Leader SS Suspended Hood w/2 Doors and Light, Excellent

3'x20" Leader Welded Cross Flow Syrup Pan (New)

3'x3' Mason Welded Syrup Pan (made as a Grimm copy). Has been scorched. Has 3/4" drawoff size (no valves). 

3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...

30"x18" Leader Welded Cross Flow Syrup Pan (New). With open boxes and threaded drawoff fittings.

30"x18" SB Soldered Finishing Pan with Cover.

30"x20" Lapierre-Waterloo Cross Flow Syrup Pan (New) with 1.5" Triclamp Fittings. 

30"x 3' Lapierre Front Pan Hood with Thimble, 8' of 12" Stack and a Rope Operated Stack Cover (New).

30"x8' Leader Evaporator w/ Lead Free Soldered Raised Flue Pan, Steamaway Pan and Welded Syrup Pan (arch needs repair). Comes with a blower and sta...

30"x8' Waterloo Oil Fired Evaporator, all insulated w/Carlin 301 Burner, Raised Flue Welded Pans (6' flue pan and 2' syrup pan) and Stainless Stack

36"x20" Lapierre-Waterloo Cross Flow Syrup Pan (New). With 1.5" tri-clamp fittings on the pan.

4'x4' Welded Patriot Syrup Pan (leaks around the drawoff fitting) SOLD AS IS

4'x6' Leader American (welded) Syrup Pan. This pan is in very good condition.

40"x20" Welded Cross Flow Syrup Pan, Excellent. 2" tri-clamp pan connections, and 1.5" tri-clamp drawoff fittings. 

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

500 Gallon Rectangular Stainless Milk Bulk Tank. One of the legs is missing, but the previous owner just used a block of wood.  A hole was cut in t...

550 Gallon Plastic Vertical Tank. It has a 2" drain fitting (female threads) down near the bottom. There are several holes drilled in the top of th...

6" Galvanized Roof Jack w/Collar, 6/12 Pitch, Sidemount.

7" D&G Short Stack Filter Press with a gear pump and some hoses. 

Airablo 1 1/2 HP Vacuum Pump w/Radiator Oil Cooler.

Atlas Copco GVS 16A, 1.2 HP Vacuum Pump, 11 CFM (used 2 seasons). 

CDL 250 GPH Horizontal RO Machine (110 volts) with Two New 4" Membranes and Storage Cannisters. This unit was made in 2014.

Used CDL 250 GPH RO Machine with Two 4" Membranes. This unit was made in 2010.

Used D&G Gear Style Cream Machine.

D&G RO Machine600 GPH w/New Membrane. This machine was just gone through by D&G and is ready for some sap. 

Used D&G Water Jacketed Canner with Stand (holds 55 +/- gallons). 

Used Dandurand Cream Machine w/Stainless Soldered Pan, Lead Free. 

Grimm Round Drawoff Tank on Stand, SS Lead Free Soldered w/1" SS Valve and Hose (13"x34").

Homemade Stainless Vacuum Booster Tank. This tank does have some fittings that have been broken off in it when they were removed.