Weight Equals Zero

A 10' wide blower unit designed to go over an over-head door and provide a curtain of air to keep pests out of the room or building.

130 Gallon H2O Stainless Round Bottom Tank on Wheels (New).

14" Stainless Roof Jack, Leader Style, 10/12 Pitch, Side mount.

18" Stack Cover w/3' of 18" Galvanized Smoke Stack.

18"x4' Lapierre Flat Bottom Syrup Pan (no dividers) New

18"x48" Lapierre Flat Bottom Syrup Pan w/Valves (New)

19"x16" Lapierre Mini Pro Syrup Pan (New).

2 1/2' x 8' Grimm Arch w/Blower (no stack).

2'x2' Stainless Front Pan Hood (New). There is no thimble or stack with this hood. 

Used 2'x4' Leader WSE Evaporator with Galvanised Arch, Stack, Bricks, WSE Drop Flue Pans and Storage Crates. The entire evaporator is on a frame wi...

2'x4' Set of Leader WSE Pans, (drop Flue) Pans were made in 2008 but never used.

2'x4' Welded CDL Flat Syrup Pan, (dented on top edge) New.

2'x8' Lapierre Vision Evaporator with Cross Flow Pans, Blower and Fire Bricks.  The glass on the front has been replaced with a steel plate, and a ...

22" Diameter Round Open Topped Draw-off Tank w/Valve and Wooden Stand. Stands 21" tall. 

24"x16" Lapierre Junior Model Syrup Pan (New). Boxes on the Left Back and Front Right. 

24"x16" Lapierre Junior Model Syrup Pan (New). Left Front/Back Right for the boxes. 

24"x24" Lapierre Waterloo Cross Flow Syrup Pan (New).

28"x34" Leader SS Suspended Hood w/2 Doors and Light, Excellent

3 HP CDL Oil Cooled Vacuum Pump (used one season).

3 HP Tuthill Water Cooled Vacuum Pump w/Electric Motor

3'x20" Leader Welded Cross Flow Syrup Pan (New)

3'x3' Mason Welded Syrup Pan (made as a Grimm copy). Has been scorched. Has 3/4" drawoff size (no valves). 

3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...

30"x18" Leader Welded Cross Flow Syrup Pan (New). With open boxes and threaded drawoff fittings.

30"x18" SB Soldered Finishing Pan with Cover.

30"x20" Lapierre-Waterloo Cross Flow Syrup Pan (New) with 1.5" Triclamp Fittings. 

30"x8' Leader Evaporator w/ Lead Free Soldered Raised Flue Pan, and Welded Syrup Pan (arch needs repair). Comes with a blower and stainless Stack. ...

30"x8' Waterloo Oil Fired Evaporator, all insulated w/Carlin 301 Burner, Raised Flue Welded Pans (6' flue pan and 2' syrup pan) and Stainless Stack

Used 325 Gallon Poly Pickup Tank. Made to fit in the back of a truck.

36"x20" Lapierre-Waterloo Cross Flow Syrup Pan (New). With 1.5" tri-clamp fittings on the pan.

4'x4' Welded Patriot Syrup Pan (leaks around the drawoff fitting) SOLD AS IS

4'x6' Leader American (welded) Syrup Pan. This pan is in very good condition.

40"x20" Welded Cross Flow Syrup Pan, Excellent. 2" tri-clamp pan connections, and 1.5" tri-clamp drawoff fittings. 

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

550 Gallon Plastic Vertical Tank. It has a 2" drain fitting (female threads) down near the bottom. There are several holes drilled in the top of th...

6" Galvanized Roof Jack w/Collar, 6/12 Pitch, Sidemount.

7" D&G 3 Frame Aluminum Filter Press with a Brass Gear Pump

7" D&G Short Stack Filter Press with a gear pump and some hoses. 

824 Gallon Lapierre Stainless Tank 5'x8'x41.25". There is a small dent and scratch on the side of the tank. 

Airablo 1 1/2 HP Vacuum Pump w/Radiator Oil Cooler.

Atlas Copco GVS 16A, 1.2 HP Vacuum Pump, 11 CFM (used 2 seasons). 

CDL 250 GPH Horizontal RO Machine (110 volts) with Two New 4" Membranes and Storage Cannisters. This unit was made in 2014.

Used CDL 250 GPH RO Machine with Two 4" Membranes. This unit was made in 2010.

D&G Horizontal Releaser w/a 1/2 HP Submersible Pump. Gone through and tested by D&G. 

Used Dandurand Cream Machine w/Stainless Soldered Pan, Lead Free. 

Deer Run Model 500 RO Machine with a Gas Motor (needs new 8" membrane and a low pressure oil switch)

Grimm 35 Gallon SS Square Filter Tank w/Rack, Valve and Wooden Stand (lead free solder)

Grimm Round Drawoff Tank on Stand, SS Lead Free Soldered w/1" SS Valve and Hose (13"x34").