Weight Equals Zero

CDL 3 HP Vacuum Pump, Oil Cooled Vane-Pump for up to 3,000 Taps.

CDL 7" Filter Press with 4 Frames and a 1/2" Electric Diaphragm Pump.

CDL 7" Filter Press with 8 Frames and a 1/2" Electric Diaphragm Pump.Removes all the dirt and sugar sand. Uses standard 7" filter papers. Can be pu...

For mid-end of season acid wash This is the acid referenced in the NanoRO instruction manual.   

CDL Vacuum Pump Oil 1-Gallon

CDL Vacuum Pump Oil (5 gallons).

CDL Vacuum Releaser w/ 1 1/2 HP Submersible Pump.

D&G 1" Dark Blue Mainline 500' Roll.

D&G Horizontal Releaser w/a 1/2 HP Submersible Pump. Gone through and tested by D&G. 

D&G/Airablo 8 cfm Gas Powered Oil Cooled Vacuum Pump (manual start) with a moisture trap. 

Used Dandurand Cream Machine w/Stainless Soldered Pan, Lead Free. 

Deer Run Model 500 RO Machine with a Gas Motor (needs new 8" membrane and a low pressure oil switch)

Fire Brick 1/2 Size. 1 1/4" Thick x 4 1/2" Wide x 9" Long. This brick rated for temperatures up to 3000 degrees Farenheight.

Grimm 35 Gallon SS Square Filter Tank w/Rack, Valve and Wooden Stand (lead free solder)

Grimm Round Drawoff Tank on Stand, SS Lead Free Soldered w/1" SS Valve and Hose (13"x34").

H2O 2 -1 HP Pumps 18"x36" Vertical Electric Releaser with Manifold.

H2O 25 Gallon Round Draw-off Tank (with cover) 21"x26". It has a 3/4" threaded coupling down at the bottom. 

H2O 3" Electric Vortex Deluxe Moisture Trap.

H2O Dual Compartment Insulated Draw-off Tank on Wheels. Comes with two 20 Gallon Compartments that have an overflow in them, and sliding covers on ...

H2O Econox 600 RO Machine. The Econox line is designed for producersowning between 1,000 to 15,000 taps- Compact, takes less than 5 sqft of floor ...

H2O Horizontal Electric Vacuum Releaser with Manifold. With a 1/2 hp Submersible pump. Good for pumping up to 10' in elevation and good for roughly...

H2O RO Clean 20L Liquid RO Soap It is used to clean organic matter stuck to the membrane surface. After a soap wash, it is necessary to rinse. Impo...

H2O Vertical Electric Releaser with 1 HP Pump, 12"x36" (no manifold). 15 gpm pump capable of pumping up to 30' in elevation. Sap inlet height of 21...

H2O Vertical Electric Releaser with 1/2 HP Submersible Pump and a Manifold (12"x36"). The 1/2 HP pump will pump up in elevation 10'. The back manif...