Used Equipment

3'x8' CDL/Dallaire Evaporator w/Airtight Front and Blower, Welded (raised flue) Pans, Hood and SS Preheater. There is a little warping in the front...

D&G 600 GPH RO Machine with a New 8" Membrane. This machine has a 1hp feed pump and a 5hp high pressure pump.

New Airablo Horizontal Electric Releaser with 2-0.5hp 12 gpm 75psi internal pumps. Good for up to 4-5,000 taps.

New 2'x4' Leader Vermonter Evaporator (Factory Second). The arch has a scratch/dent on one side roughly 10" long. Comes with the base stack, and 6'...

Used Leader Mini Extreme RO Machine w/Two 4" Membranes and Two Extra Membranes. This machine comes with the wash tank mounted on the RO.

3,700 +/- Gallon Glass Lined Vacuum Tank w/New Paint on the Outside. Mounted on some Steel Beams. Roughly 109" high x 100" wide x 108" in total len...

1,500 Gallon Stainless Bulk Tank w/Agitator. Rough dimensions including fittings 65" wide x 13' long x 8' high. Was previously used for heating up ...

Micro 3 RO Machine with Three - 4" Membranes. This unit was a micro2 that had a third post added and is set up on wheels. Was taken in on trade tow...

10" H2O 6 Frame Aluminum Filter Press w/ Air Diaphragm Pump and Stand. Comes with a blocker plate so you can shorten up the press if you are runnin...

Airablo 1 1/2 HP Vacuum Pump w/Radiator Oil Cooler.

Used 1 1/2 HP Airablo Oil Cooled Vacuum Pump with Oil Reclaimer.

2'x2' Leader revolution Syrup Pan, Right Draw w/Closed Box (New Factory Second).

4'x12' Set of Pans (8' Lead Free Soldered Flue Pan and 4' Welded Syrup Pan). The flue pan was made in 1993, the syrup pan was 2008. There is a litt...

Leybold Vacuum Pump, Oil Cooled, 110 Volts (for up to 600 taps)

Used 7 1/2" Leader Plastic Filter Press w/5 Frames and an Air Diaphragm Pump.

Airablo Electric Vacuum Pump, 8 cfm with moisture trap. This pump is only pulling 16-18" and is sold as is. It may be an easy fix, but we have not ...

7" Wes Fab Full Size Filter Press with Gear Pump. 

3'x20" Leader Welded Cross Flow Syrup Pan (New)

1/2 Pint Leader Supreme Welded Pan (Factory Second). Not sure why it is a factory second. 

Lapierre Triple Pan Washer w/Tank, 1 HP Gould Pump and 3) 6'x2' Covers w/Spinners.

2'x5' Leader Welded Finishing Pan (New, factory second).

30"x18" Leader Welded Cross Flow Syrup Pan (New). With open boxes and threaded drawoff fittings.

Bernard Vertical Double Vacuum Releaser. Good for up to 2,500 taps. Back manifold needs a clip replaced. Comes with a new clip.

Leader Half Pint Evaporator w/SS Syrup Pan, SS Preheater Pan and Valves. The pans are welded. The back of the arch has been patched around the coll...

4'x4' Welded Stainless Syrup Pan with Tri-Clamp Fittings (like new)

1100 Gallon Plastic Vertical Tank. Rough dimensions on the tank are 87" in diameter and 53" tall. This tank has a fitting on the side near the top ...

Used BHR Hobby Double Vacuum Releaser for up to 1,000 taps.

Used 2'x2' Smokey Lake Welded Syrup Pan (Grimm copy).

Steam Kettle, Vulcan Hart Corp. Model SL40. We believe it may hold 40 gallons, but not sure of that.

3'x3' Waterloo Welded Syrup Pan. There are a few hot spots/dings on the bottom of the pan. 

Used Electric Single Diaphragm Vacuum Pump with 1.25" inlet and outlet. No releaser needed.

Used 425 Gallon Plastic Pickup Tank. There is a hole in the cover that has been taped over. Comes with a 2" valve on the tank. 

RO Bucket Kit (RB25) for 200 +/- Taps. It has 5 - 8gph membranes. Mounted on a wooden board that is roughly 4' long and from the floor to the top o...

Leader 3'x5' Aluminum Hood with Preheater. The Preheater appears to be homemade. 8" Thimble on the hood, and it comes with 1 section of stack. 

Used 16"x16" Leader Gas Canner with SS Pan, Filter Rack, Cover, Valve and Thermometer.

D&G Round Drawoff Tank on Wheels w/Cover (25 +/- gallons). 28.5" from the floor to the top of the cover (not counting the handle). The tank its...

Used Marcland Automatic Draw-off Complete with a Brass Paddle Valve. Comes with the Temperature Probe and wire.

550 Gallon Plastic Vertical Tank. It has a 2" drain fitting (female threads) down near the bottom. There are several holes drilled in the top of th...

A 10' wide blower unit designed to go over an over-head door and provide a curtain of air to keep pests out of the room or building.

8" Maple Guy's Filter Press (for a Small Producer) w/Papers.

Used 325 Gallon Poly Pickup Tank. Made to fit in the back of a truck.

42"x36" Lapierre/Waterloo Welded Cross Flow Syrup Pan.

42"x18" Lapierre Welded Cross Flow Syrup Pan. This pan has 2" Tri-Clamp fittings on it.

5'x20" CDL SS Welded Cross Flow Syrup Pan. This pan has 2" tri-clamp fittings on the end.

4'x4' King Lead Free soldered syrup pan. Both draw-offs have been repaired.

Used 125 Gallon Horizontal Plastic Tank w/Valve

Fork Truck Attachment for Picking up Drums (missing one arm) SOLD AS IS. Can be used as is to move 1 drum at a time.

14" Stainless Roof Jack, Leader Style, 10/12 Pitch, Side mount.